We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD Locking 3.5mm TRS to 4-Pin LEMO Timecode Cable 35.5cm

SKU CH-JVN5-F8XE0

Connects timecode generators to RED DSMC2 Jetpacks or V-Lock Expanders via locking 3.5 mm TRS to 4-pin LEMO over 35.5 cm

  • Locking 3.5 mm TRS secures timecode sync
  • Straight 4-Pin LEMO male plugs into RED DSMC2 Jetpacks and V-Lock Expanders
  • 5 cm fully extended length keeps rigs tidy
  • High-quality connectors and cabling deliver reliable rugged performance
  • Designed for jam sync from TC-NEO generators and slates

Locking 3.5mm TRS to 4-Pin LEMO Cable

This 35.5 cm cable connects a 3.5 mm TRS output to a straight 4-pin LEMO input. It is built for production crews who need to jam-sync timecode from a generator or slate into RED DSMC2 Jetpacks or V-Lock Expanders. The locking 3.5 mm plug prevents accidental disconnection during handheld or gimbal work.

Locking 3.5 mm TRS Connector

The 3.5 mm end uses a locking mechanism that secures the plug in the source device. This removes the risk of a loose connection interrupting the timecode feed while the camera moves. The straight 4-pin LEMO male connector mates directly with the timecode input on supported RED expanders without an adapter.

35.5 cm Fully Extended Length

The cable measures 35.5 cm (13.98 inches) when fully extended. This fixed length suits rigs where the timecode generator mounts close to the camera body. Teams needing a longer run between the generator and the expander will require a different cable.

Highlights

  • Locking 3.5 mm TRS secures timecode sync
  • Straight 4-Pin LEMO male plugs into RED DSMC2 Jetpacks and V-Lock Expanders
  • 5 cm fully extended length keeps rigs tidy
  • High-quality connectors and cabling deliver reliable rugged performance
  • Designed for jam sync from TC-NEO generators and slates

Specifications

BrandLORDWORLD

Questions about this item

Will the locking 3.5 mm TRS plug wear out and need replacement after repeated mate cycles?

The locking mechanism on the 3.5 mm TRS end is built for repeated insertion and removal; under normal production use it does not require scheduled replacement.

What is the practical length limit before signal integrity degrades on this 35.5 cm timecode run?

At 35.5 cm the cable stays well within the distance where timecode signals remain clean, so length itself is not the limiting factor.

Does the straight 4-pin LEMO connector or the cable jacket generate noticeable heat during all-day timecode jam-sync sessions?

Passive timecode cables carry only low-level signalling current, so neither the LEMO connector nor the jacket produces measurable heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.