LORDWORLD
LORDWORLD Locking 3.5mm TRS to 3.5mm TRS Coiled Cable 7 in 19 in
A locking 3.5 mm TRS coiled cable linking wireless microphone systems or timecode devices to cameras and recorders, stretching from 7 in to 19 in
- Locking 3.5 mm TRS connectors prevent accidental disconnection during recording
- Coiled design extends from 17.78 cm to 48.3 cm for flexible camera mounting
- Compatible with Sennheiser, Rode, Sony, Deity and Saramonic camera-mount wireless systems
- Serves as replacement output cable for Saramonic K9-US and K9 wireless systems
- Enables jam-sync timecode input for TC-NEO generators and compatible cameras
Versatile Locking TRS Audio Cable
This coiled cable provides a locking 3.5 mm TRS to 3.5 mm TRS connection for wireless microphone systems and timecode devices. It serves as a replacement output cable for the Saramonic K9-US and K9 wireless systems and the TC-NEO timecode generator. High-quality connectors ensure reliable signal transfer in professional audio setups. The coiled design keeps cable runs tidy on camera rigs.
Check Connector Compatibility Before Ordering
Verify that your wireless receiver or timecode generator uses a locking 3.5 mm TRS output jack. Confirm that the camera, recorder or other destination device accepts a standard 3.5 mm TRS input for audio or timecode sync. The cable is wired for stereo TRS signals; it will not carry balanced audio or multi-channel formats. Ensure your devices require a straight TRS-to-TRS pinout rather than a TRRS or offset configuration.
Coiled Design Fits Compact Camera Rigs
At 17.78 cm coiled and 48.3 cm fully extended, the cable bridges nearby devices without excess slack. The locking plug secures the connection to the transmitter or generator during movement. It frees up space on crowded cold-shoe mounts by eliminating loose straight cables. The rugged jacket withstands repeated coiling and uncoiling on location shoots.
Highlights
- Locking 3.5 mm TRS connectors prevent accidental disconnection during recording
- Coiled design extends from 17.78 cm to 48.3 cm for flexible camera mounting
- Compatible with Sennheiser, Rode, Sony, Deity and Saramonic camera-mount wireless systems
- Serves as replacement output cable for Saramonic K9-US and K9 wireless systems
- Enables jam-sync timecode input for TC-NEO generators and compatible cameras
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Does the cable come with any adapters or do I need to buy them separately?
The cable has locking 3.5 mm TRS connectors on both ends and is ready to use with compatible wireless receivers, timecode generators or cameras; no extra adapters are included or required for the listed devices.
Should I choose the 7 inch coiled length or the 19 inch extended length for my setup?
It is a single coiled cable that measures 7 inches (17.78 cm) when relaxed and stretches to 19 inches (48.3 cm) fully extended, so you get both lengths in one cable.
Will the 19 inch extended reach work with a camera-mounted receiver on a rig?
The cable stretches to 19 inches (48.3 cm) fully extended, giving enough slack to connect a camera-mounted wireless receiver or timecode generator to the camera body without tension.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
