We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact green circuit board with black ATX connector and screw terminals

LORDWORLD

LORDWORLD LDA160WL 12V 160W DC-ATX Power Adapter Board

SKU CH-K1M7-ZA29N

Plugs directly into the motherboard ATX connector to eliminate 24 wires, delivering 12 V 160 W with overcurrent and short-circuit protection

  • Cleaner build with 24 fewer wires by plugging straight into the ATX connector
  • Fits compact ATX boards while saving internal case space
  • Delivers 160 W at 12 V to meet desktop power needs
  • Overcurrent protection shuts output off at maximum current
  • circuit protection cuts power instantly when a fault occurs

Direct ATX Power Board

This LORDWORLD LDA160WL adapter plugs straight into a motherboard 24-pin ATX socket to deliver 12 V at up to 160 W. It removes 24 loose cables from the build, making it ideal for compact HTPC or ITX systems where internal space is tight.

Sustained Load Behaviour

Overcurrent protection shuts the output off if the draw hits the maximum rated limit, while short-circuit protection cuts power instantly during a fault. High heat resistance keeps the module stable during continuous operation inside a small chassis.

Compatibility Checklist

Verify that your motherboard uses a standard 24-pin ATX power input and that the 12 V source you plan to connect can supply the required wattage. The board is not suited for systems needing multiple auxiliary power connectors or voltages other than 12 V.

Highlights

  • Cleaner build with 24 fewer wires by plugging straight into the ATX connector
  • Fits compact ATX boards while saving internal case space
  • Delivers 160 W at 12 V to meet desktop power needs
  • Overcurrent protection shuts output off at maximum current
  • circuit protection cuts power instantly when a fault occurs

Specifications

BrandLORDWORLD

Questions about this item

Does the LDA160WL 12V 160W board add noticeable heat or noise inside a small HTPC case?

The adapter plugs straight into the ATX connector, removing 24 wires that would otherwise block airflow. It has no fan, so it adds no mechanical noise, and its high heat resistance rating means it tolerates sustained 160 W loads without throttling.

What external power source must I already own for the LDA160WL to work?

You need a 12 V DC supply that can deliver at least 160 W — typically a 12 V brick or a 12 V rail from a larger PSU — because the board itself only converts and distributes that input to the motherboard.

Will the LDA160WL protect an older motherboard if a short or overload occurs?

Yes. Built-in overcurrent protection shuts the output off when the maximum current is reached, and short-circuit protection cuts power instantly if a fault appears on any rail, safeguarding legacy boards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.