We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact right-angle HDMI male-to-female adapter with gold-plated connectors and zinc alloy housing

LORDWORLD

LORDWORLD HDMI Male to Female Right Angle Adapter SIDE-90/W 18Gbps 4K@60Hz

SKU CH-V3TK-NA9JE

A right-angle HDMI male-to-female adapter routes cables 90 degrees sideways while passing 18 Gbps 4K 60 Hz HDR Dolby Vision HDCP 2.2 signals through 24 K gold-plated connectors in a shielded

  • Supports 4K at 60 Hz with HDR and Dolby Vision via 18 Gbps bandwidth
  • Zinc alloy housing blocks EMI and RFI interference for clean signal
  • 24 K gold-plated connectors give a precise and firm connection
  • Internal PCB with clean circuit layout ensures reliable assembly
  • Right-angle design routes cable sideways to save space behind devices

Compact HDMI right-angle adapter for tight spaces

This LORDWORLD SIDE-90/W adapter adds a 90-degree male-to-female turn so an HDMI cable can run parallel to the device instead of sticking straight out. It supports 4K at 60 Hz, HDR and Dolby Vision up to 18 Gbps bandwidth with HDCP 2.2 compliance. The gold-plated connectors and internal PCB are built for a firm, low-loss connection. Buyers who need a straight-through coupler or a different bend direction will need another part.

Passive design with shielded zinc-alloy housing

The adapter draws no external power and adds no active circuitry, so it introduces no heat or fan noise into the system. A full zinc-alloy shell blocks EMI and RFI interference while the gold-plated contacts resist corrosion. Because it is purely passive, power draw remains that of the connected source and display. Installations that require signal amplification or active equalisation cannot use this adapter.

Fits standard HDMI ports and frees rear clearance

The right-angle profile lets the cable sit flush against the back of a TV, monitor or AV receiver, reclaiming depth behind the device for wall mounts or cramped cabinets. It plugs directly into any full-size HDMI port without tools or drivers. Builds that need an upward, downward or left-facing bend must select one of the three other orientation models sold separately.

Highlights

  • Supports 4K at 60 Hz with HDR and Dolby Vision via 18 Gbps bandwidth
  • Zinc alloy housing blocks EMI and RFI interference for clean signal
  • 24 K gold-plated connectors give a precise and firm connection
  • Internal PCB with clean circuit layout ensures reliable assembly
  • Right-angle design routes cable sideways to save space behind devices

Specifications

BrandLORDWORLD

Questions about this item

How do I fit the SIDE-90/W adapter into a tight HDMI port without bending the cable?

Insert the male plug straight into the device port until the gold-plated connector seats fully; the 90-degree side exit then routes the cable parallel to the chassis, so no force is needed on the cable itself.

Will the 24K gold-plated connectors need cleaning or replacement over time?

The gold plating resists oxidation, so routine cleaning is not required; only replace the adapter if the zinc-alloy housing is physically damaged or the HDMI handshake fails.

At what point does the 18Gbps bandwidth limit affect a 4K 60Hz HDR signal?

The 18Gbps ceiling is reached with full 4K 60Hz 4:4:4 HDR Dolby Vision; deeper colour or higher frame rates would exceed the adapter’s rated bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.