We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 5.25 inch front panel hub with two USB-C and two USB-A ports and a 2.6ft cable

LORDWORLD

LORDWORLD 5.25" USB 3.2 10Gbps Front Panel Hub 2×Type-C 2×USB-A 2.6ft Cable

SKU CH-6CQ1-HPVQ5

A 5.25-inch front-panel hub adds two USB-C and two USB-A ports at 10 Gbps via a 20-pin USB 3.1 Type-E header with a 2.6 ft cable

  • Four USB 3.2 Gen2 ports deliver up to 10Gbps each
  • Two Type-C and two USB-A connectors suit modern and legacy devices
  • Fits a standard 5.25-inch front bay for tidy internal expansion
  • Powered from motherboard USB header or PSU SATA header via jumper block
  • Includes 2.6ft USB-C male to Type-E cable for header connection

5.25″ USB 3.2 front-panel hub

This hub adds four USB 3.2 Gen 2 ports to a 5.25″ drive bay. Two ports are USB Type-C and two are USB Type-A, each rated for up to 10 Gbps data transfer. It connects to the motherboard via a USB 3.1 20-pin Type-E header and includes a 2.6 ft cable. A jumper block lets you choose between header power or a PSU SATA power connector for the hub.

Builders adding fast front USB to a desktop

Suits PC builders who have a spare 5.25″ bay and a motherboard with a USB 3.1 20-pin Type-E header and want both Type-C and Type-A ports at 10 Gbps. Not suited for systems that lack a Type-E header or have no 5.25″ bay available. Buyers needing more than four ports or a different mounting style should look at other solutions.

Simple bay install with header and power choice

Installation slides the unit into a standard 5.25″ bay and secures it with screws. The 2.6 ft Type-C to Type-E cable plugs into the motherboard header. The jumper block selects power from the header or a PSU SATA connector. Common issues are forgetting to set the jumper for the chosen power source or finding the header cable too short for large cases.

Highlights

  • Four USB 3.2 Gen2 ports deliver up to 10Gbps each
  • Two Type-C and two USB-A connectors suit modern and legacy devices
  • Fits a standard 5.25-inch front bay for tidy internal expansion
  • Powered from motherboard USB header or PSU SATA header via jumper block
  • Includes 2.6ft USB-C male to Type-E cable for header connection

Specifications

BrandLORDWORLD

Questions about this item

Does my motherboard need a USB 3.1 20-pin Type-E header for this hub to work?

Yes, a USB 3.1 20-pin Type-E header is required to connect the 2.6 ft cable and enable both Type-C ports at 10 Gbps.

Will my existing USB 3.0 devices run at full speed when plugged into this 10 Gbps hub?

They will work but are limited to their own 5 Gbps maximum; the hub itself supports up to 10 Gbps on all four ports.

How can I verify each port is delivering 10 Gbps after installation?

Connect a 10 Gbps-capable drive, transfer a large file and check that sustained read or write speeds exceed 5 Gbps in your OS transfer dialog or benchmark tool.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.