We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with mSATA edge connector and microSD slot

LORDWORLD

LORDWORLD 30x50mm MSATA to Micro SD TF Card Reader Adapter

SKU CH-R566-7H8ZV

Converts a 50 mm mSATA SSD to a Micro SD TF card slot with SATA 1.5 and 3.0 Gbps speeds up to 300 MB/s

  • Driver-free plug-and-play operation with BIOS and OS support
  • Cold-plug design protects data during mobile storage use
  • SATA Gen1 at 1.5 Gbps and Gen2 at 3.0 Gbps speeds
  • Fits 50 mm MSATA SSDs for desktop and notebook installation
  • Sage S682 chipset works with Windows 98 through 11 and Linux

MSATA 50mm to Micro SD Adapter

This LORDWORLD adapter converts a standard 50mm MSATA solid-state drive into a Micro SD card reader. It uses the SAGE S682 chipset to bridge the SATA interface to a TF card slot, enabling data mobility without driver installation across DOS, Windows 98 through 11, and Linux systems.

Industrial maintenance and legacy system upgrades

Technicians servicing embedded equipment with MSATA slots can swap storage media quickly using high-speed Micro SD cards. The board is not suitable for hot-plug scenarios; the supplier advises cold insertion only after shutdown. Builders needing native SATA cabling or larger form-factor bays will not find those features here.

SATA Gen1 and Gen2 compatibility

The adapter negotiates at 1.5 Gbps and 3.0 Gbps, delivering up to 150 MB/s and 300 MB/s respectively with compatible media. This single interface speed ceiling determines whether the throughput meets the application's requirements.

Highlights

  • Driver-free plug-and-play operation with BIOS and OS support
  • Cold-plug design protects data during mobile storage use
  • SATA Gen1 at 1.5 Gbps and Gen2 at 3.0 Gbps speeds
  • Fits 50 mm MSATA SSDs for desktop and notebook installation
  • Sage S682 chipset works with Windows 98 through 11 and Linux

Specifications

BrandLORDWORLD

Questions about this item

Should I pick a 30 mm or 50 mm version for my mSATA slot?

The adapter board measures 30x50 mm and fits the standard 50 mm mSATA SSD footprint, so a single size covers both desktop and notebook slots.

What does the 3.0 Gbps SATA Gen2 rating mean for real-world throughput?

The bridge tops out at 300 MB/s, so a high-speed microSD card will be the bottleneck long before the SATA link saturates.

Which SATA standard does the Sage S682 chipset implement and what speed ceiling does it enforce?

It implements SATA Gen1 at 1.5 Gbps and Gen2 at 3.0 Gbps, capping sustained transfers at 150 MB/s and 300 MB/s respectively.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.