We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five small 30mm square black fans with short wires

LORDWORLD

LORDWORLD 3010 12V 30mm case fan 5-pack

SKU CH-PWW4-12Q78

Five 12 V 30 mm dual ball-bearing fans deliver 3.72 CFM at 21 dBA for compact PC, router or Raspberry Pi cooling

  • Compact 30×30×10 mm design fits tight DIY spaces
  • Dual ball bearings rated for 50000 hours of continuous use
  • 12 V brushless motor delivers 3.72 CFM at only 21 dBA
  • 300 mm XH2.54 lead reaches confined chassis locations
  • Five-fan pack covers multiple small-form-factor cooling needs

Micro 12 V cooling for tight builds

This LORDWORLD 3010 pack contains five 12 V DC brushless fans measuring 30 mm square by 10 mm thick. Each unit draws 0.48 A at 0.48 W and spins at 7500 RPM to deliver 3.72 CFM airflow with 4.75 mmH₂O static pressure at 21 dBA. The XH2.54 connector leads are 300 mm long, making the set suited to small PC cases, routers, Raspberry Pi boards, TV boxes, VR headsets and similar confined spaces.

Suited for compact 12 V DC projects

The dual ball bearings are rated for 50000 hours of continuous 24-hour operation, so the fans handle long-duration cooling in embedded devices, 3D-printer hot-end ducts or miniature enclosures. Builders who need standard motherboard 3-pin or 4-pin PWM headers, larger frame sizes, or higher airflow volumes should look elsewhere because the 30 mm footprint and proprietary connector limit direct compatibility with typical ATX chassis.

XH2.54 connector dictates integration

The single specification that decides fit is the XH2.54 2-pin plug on a 300 mm lead; it requires a matching header or an adapter cable to power the fan from a standard 12 V source. Without that connection the fans cannot be used, regardless of their airflow or noise ratings.

Highlights

  • Compact 30×30×10 mm design fits tight DIY spaces
  • Dual ball bearings rated for 50000 hours of continuous use
  • 12 V brushless motor delivers 3.72 CFM at only 21 dBA
  • 300 mm XH2.54 lead reaches confined chassis locations
  • Five-fan pack covers multiple small-form-factor cooling needs

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the fan is running at the rated 7500 RPM after installation?

Use a tachometer or motherboard fan-speed readout; a steady 7500 RPM indicates the dual ball bearing motor is operating within specification.

What comes in the five-pack and do I need any extra cables or adapters?

The pack contains five 3010 fans with pre-attached XH2.54 connectors on 300 mm leads; no additional cables are required for a standard 12 V header.

Should I choose the 12 V 0.48 A version or a different voltage for my Raspberry Pi case?

This model is only offered in 12 V DC drawing 0.48 A; match it to a 12 V supply rail — lower-voltage boards need a separate regulator.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.