We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with blue electrolytic capacitors and silver screw terminals

LORDWORLD

LORDWORLD 300W 20A DC-DC Buck Converter gender changer

SKU CH-6RRJ-8YNDQ

Steps down DC voltage at up to 300 W and 20 A with constant-current LED driving

  • Delivers up to 300 W for high-power step-down tasks
  • Handles 20 A continuous current for demanding LED arrays
  • Constant-current mode keeps LED brightness stable
  • Built-in electrolytic capacitor smooths output voltage ripple

High-power step-down module

The LORDWORLD buck converter steps a higher DC voltage down to a lower level at up to 300 W and 20 A continuous current. It integrates constant-current regulation so it can drive LED arrays directly without an external driver. Electrolytic capacitors on the board help smooth output ripple under heavy loads.

Fixed-output buck topology limits

A buck converter can only reduce voltage; it cannot boost or invert the input, so the source must always exceed the desired output. The 20 A ceiling means the module cannot support loads that draw more current, and efficiency drops as the input-to-output differential widens, increasing heat that must be managed externally.

Highlights

  • Delivers up to 300 W for high-power step-down tasks
  • Handles 20 A continuous current for demanding LED arrays
  • Constant-current mode keeps LED brightness stable
  • Built-in electrolytic capacitor smooths output voltage ripple

Specifications

BrandLORDWORLD

Questions about this item

Should I choose a 20 A or 300 W version for my LED driver project?

The module is rated for both 20 A and 300 W simultaneously; select it when your load stays within both limits.

What does the 300 W rating mean once the converter is installed in my machine?

It indicates the maximum continuous output power the buck converter can deliver while stepping down voltage for your LED driver or other DC load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.