We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 and mSATA slots and SATA connector

LORDWORLD

LORDWORLD 2-in-1 M.2 NGFF & mSATA to SATA 3.0 Adapter

SKU CH-PX0D-GNG50

Converts M.2 NGFF B-key or mSATA SSDs to 2.5" SATA 3.0 with 52-pin Mini PCI-e and B-key sockets, prioritising M.2 drives

  • Converts M.2 NGFF and mSATA drives to 2.5" SATA form factor
  • Supports SATA 3.0 for fast data transfer rates
  • Built-in protection against short circuits and thermal overload
  • Fits B-key and B/M-key M.2 SSDs with 52-pin Mini PCIe connector
  • Compact 98 x 65.5 mm PCBA design for easy installation

Dual-Slot M.2 & mSATA Adapter

This LORDWORLD adapter converts one M.2 NGFF B-key or B/M-key SSD and one mSATA SSD into a single 2.5-inch SATA 3.0 drive. The board measures 98 x 65.5 mm and fits standard drive bays. Only the M.2 drive operates when both slots are populated. The M.2 slot accepts .7 and 1.0 spec devices.

Suits B-key SATA upgrades, not M-key

Builders adding a SATA-based M.2 drive to a 2.5-inch bay can use this board. It also supports legacy mSATA modules when the M.2 slot is empty. Buyers with M-key only SSDs cannot use the M.2 connector. Systems lacking a free SATA port or 2.5-inch bay should look elsewhere.

B-key M.2 requirement decides fit

The single specification that determines compatibility is the M.2 keying: the onboard female connector accepts only B-key or B/M-key SATA NGFF modules. M-key drives are physically incompatible and will not function. No other interface or protocol is supported by this adapter.

Highlights

  • Converts M.2 NGFF and mSATA drives to 2.5" SATA form factor
  • Supports SATA 3.0 for fast data transfer rates
  • Built-in protection against short circuits and thermal overload
  • Fits B-key and B/M-key M.2 SSDs with 52-pin Mini PCIe connector
  • Compact 98 x 65.5 mm PCBA design for easy installation

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the adapter is working after I install a B-key M.2 drive?

The system BIOS should detect the drive as a SATA device and allow formatting or OS installation without errors.

What comes in the box and what must I supply myself?

The adapter board is included; you must provide a B-key or B/M-key M.2 NGFF SSD or an mSATA SSD and a standard SATA data cable.

Which M.2 key type should my SSD have for this adapter?

Choose a B-key or B/M-key M.2 NGFF SSD; M-key SSDs are not supported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.