LORDWORLD
LORDWORLD 2 Bay 2.5" SAS/SATA Backplane Cage with Slim ODD Tray for 5.25" Bay
Fits two 2.5" SAS or SATA drives and one slim ODD in a 5.25" bay with dual-channel 12Gbps support
- Fits two 2.5" SAS/SATA drives and one slim ODD in a single 5.25" bay
- Full metal construction suited for medical, military and industrial systems
- Accepts drive heights of 5mm, 7mm, 9.5mm, 12.5mm and 15mm
- Dual-channel backplane supports SATA 6Gbps and SAS 12Gbps speeds
- Two 4-pin power connectors supply all installed components
Rugged backplane cage for 5.25-inch bays
The LORDWORLD 2-bay backplane cage mounts in a standard external 5.25-inch drive bay and is built from full metal for durability in medical, military, media-server and industrial PC environments. It accepts two 2.5-inch SAS or SATA drives plus one slim optical disk drive.
Dual-channel SAS 12Gbps and SATA 6Gbps support
The backplane provides dual-channel connectivity that runs at up to SAS 12Gbps or SATA 6Gbps, so drive performance is limited only by the installed drives and host controller. Two 4-pin power connectors supply the cage, drives and slim ODD from the system power supply.
Holds two drives from 5 mm to 15 mm thick
Drive trays accommodate 2.5-inch drives with heights of 5 mm, 7 mm, 9.5 mm, 12.5 mm and 15 mm, covering most common SSDs and hard drives. The single slim ODD tray fits one standard slimline optical drive; builders needing more than two drive bays or a full-height optical drive will need a different solution.
Highlights
- Fits two 2.5" SAS/SATA drives and one slim ODD in a single 5.25" bay
- Full metal construction suited for medical, military and industrial systems
- Accepts drive heights of 5mm, 7mm, 9.5mm, 12.5mm and 15mm
- Dual-channel backplane supports SATA 6Gbps and SAS 12Gbps speeds
- Two 4-pin power connectors supply all installed components
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What does the 12Gbps SAS speed mean once the backplane is installed?
The cage passes up to 12Gbps per SAS lane; actual throughput depends on the drives and host controller used.
Which interface standard does the backplane use and what does it limit?
It uses SATA 6Gbps or SAS 12Gbps dual channel, capping each drive to its respective protocol maximum.
What drive heights and bay size does the cage need to fit?
It fits a 5.25" external bay and accepts 2.5" drives from 5mm to 15mm tall plus a slim ODD.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



