We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic drive caddies with open SATA connectors

LORDWORLD

LORDWORLD 2.5 to 3.5 SATA Hard Drive Adapter 2-Pack

SKU CH-WST3-7WYNR

Converts 2.5 inch SATA drives to 3.5 inch form factor with direct SATA III interface supporting 6Gbps speeds, hot-swap capability and cross-platform compatibility

  • Converts 2.5 inch SATA drives to 3.5 inch bay size
  • Cable-free SATA III interface enables direct installation
  • Supports hot-swap and plug-and-play across Windows, Mac OS and Linux
  • Up to 6 Gbps transfer speed with SATA 3.0 backward compatibility
  • Flame-retardant ABS construction weighs 3.52 ounces for lightweight mounting

2.5 to 3.5 SATA Drive Adapter 2-Pack

This two-pack of LORDWORLD adapters converts 2.5-inch SATA hard drives or solid-state drives into the 3.5-inch form factor. Each bracket accepts drives measuring 7 mm, 9.5 mm or 12.5 mm thick and mounts directly into a standard 3.5-inch drive bay. The integrated SATA III connector eliminates the need for extra cables or driver installation.

Suits builders adding 2.5-inch SATA storage

These adapters work with any SATA I, II or III drive and support hot-swap operation under Windows, macOS and Linux. They are not suitable for drives thicker than 12.5 mm, for M.2 or PCIe storage devices, or for systems that lack a 3.5-inch mounting location.

6 Gbps SATA III interface

The built-in SATA 3.0 interface delivers up to 6 Gbps maximum transfer rate and remains backward compatible with SATA I and II drives. This single specification determines whether the adapter can meet the bandwidth needs of a given 2.5-inch SATA drive.

Highlights

  • Converts 2.5 inch SATA drives to 3.5 inch bay size
  • Cable-free SATA III interface enables direct installation
  • Supports hot-swap and plug-and-play across Windows, Mac OS and Linux
  • Up to 6 Gbps transfer speed with SATA 3.0 backward compatibility
  • Flame-retardant ABS construction weighs 3.52 ounces for lightweight mounting

Specifications

BrandLORDWORLD

Questions about this item

Will the screw holes on the 2.5 to 3.5 adapter wear out if I swap drives often?

The screw holes are designed for repeated fixing of 2.5 inch drives and for securing the caddy into a 3.5 inch bay, so normal swaps should not strip them.

Does the SATA 3.0 interface limit sustained throughput to 6 Gbps?

Yes, the adapter uses the SATA 3.0 protocol with a maximum transmission rate of 6 Gbps, which is the ceiling for any drive installed in it.

Will the ABS bracket get hot or draw extra power during all-day operation?

The adapter is a passive 3.52 ounce ABS tray with no active components, so it adds no measurable heat or power draw beyond the drive itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.