We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Full-metal adapter bracket converting a 2.5 inch drive to 3.5 inch form factor with 22-pin SAS SATA connector

LORDWORLD

LORDWORLD 2.5" to 3.5" SAS SATA 22pin Hard Drive Adapter

SKU CH-FHE0-QPYNK

Converts a 2.5 inch SATA or SAS drive to fit a 3.5 inch bay, supports 7, 9.5, 12.5 and 15 mm heights and 12 Gbps speeds

  • Fits 2.5" SATA drives into any 3.5" SATA bay
  • Accepts 7, 9.5, 12.5 and 15mm drive heights
  • Runs at SATA 6Gbps or SAS 12Gbps single channel
  • Full metal construction protects drives during hot swaps
  • Tool-free design allows quick drive changes in rackmounts

2.5" to 3.5" SAS SATA Adapter

This full-metal adapter converts a 2.5 inch SATA HDD or SSD into a 3.5 inch form factor for use in standard drive bays. It is built for system builders and IT professionals who need to install smaller drives into 3.5 inch hot-swap backplanes, rackmounts or internal bays.

Capacity and headroom

The bracket accepts drives measuring 7, 9.5, 12.5 and 15 mm in height, covering the common range of laptop and enterprise 2.5 inch units. It passes through a single-channel SAS 3.0 12Gbps or SATA 6Gbps connection, so the drive runs at its native interface speed without added latency.

What the mounting kit changes

The heavy-duty metal frame secures the drive firmly while leaving the 22-pin connector accessible for quick swaps. It turns a loose 2.5 inch drive into a rugged module that fits directly into existing 3.5 inch carrier trays, eliminating the need for improvised brackets or cable extensions.

Highlights

  • Fits 2.5" SATA drives into any 3.5" SATA bay
  • Accepts 7, 9.5, 12.5 and 15mm drive heights
  • Runs at SATA 6Gbps or SAS 12Gbps single channel
  • Full metal construction protects drives during hot swaps
  • Tool-free design allows quick drive changes in rackmounts

Specifications

BrandLORDWORLD

Questions about this item

Will my 2.5 SATA SSD fit this 3.5 bay adapter if it is 15mm thick?

Yes, the adapter accepts 2.5 SATA drives from 7mm up to 15mm height so a 15mm drive will mount correctly.

How can I confirm the adapter is passing data at SAS 3.0 12Gbps after installation?

Check the host controller or BIOS link-speed report; it should show a 12Gbps negotiated rate on the single SAS channel.

Does the package include the 22pin SAS SATA cable or only the metal mounting bracket?

The kit supplies the full-metal mounting bracket and the 22pin SAS SATA connector assembly; no separate cable purchase is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.