We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black adapter with M.2 and 2.5 SATA slots, USB cable, blue LED, power switch

LORDWORLD

LORDWORLD 2.5 SATA M.2 to USB 3.2 Gen 1 Adapter

SKU CH-1W4C-7BCV7

Connects a 2.5 SATA drive or SATA M.2 SSD to USB 3.2 Gen 1 at 5Gbps with an activity LED and power switch

  • Transfer speeds up to 5Gbps with USB 3.2 Gen 1
  • Works with 2.5 SATA HDD or SSD and SATA M.2 SSD
  • Backward compatible with USB 2.0 for older ports
  • Blue LED shows drive activity at a glance
  • Large power switch turns the drive on or off

Single-Drive SATA Adapter

The LORDWORLD adapter connects one 2.5-inch SATA HDD or SSD, or one SATA M.2 SSD, to a USB 3.2 Gen 1 port. It does not support using both drive types at the same time. The device suits technicians and hobbyists who need quick external access to a single SATA drive for cloning, recovery or data transfer.

Passive Cooling and Low Power

No fan is fitted; the aluminium body acts as a passive heatsink for the drive during normal use. Operation is silent, and power draw is limited to what the USB 3.2 Gen 1 port can supply, with backward compatibility to USB 2.0. A large on/off switch lets you cut power to the drive without unplugging the cable.

LED Status and Simple Setup

A cool blue LED indicates drive activity so you can see read or write operations at a glance. No drivers or bundled software are required on modern operating systems; the adapter appears as a standard mass-storage device. The package includes only the adapter and a USB cable, keeping the setup minimal.

Highlights

  • Transfer speeds up to 5Gbps with USB 3.2 Gen 1
  • Works with 2.5 SATA HDD or SSD and SATA M.2 SSD
  • Backward compatible with USB 2.0 for older ports
  • Blue LED shows drive activity at a glance
  • Large power switch turns the drive on or off

Specifications

BrandLORDWORLD

Questions about this item

How do I connect a 2.5 SATA drive and a SATA M.2 SSD to this adapter?

Insert either one 2.5 SATA HDD or SSD or one SATA M.2 SSD into the corresponding slot; the adapter does not support using both drives at the same time.

What maintenance will this adapter need over time?

No routine maintenance is required; keep the USB 3.2 Gen 1 connector and drive slots free of dust and ensure the on/off power switch operates cleanly.

What limits transfer speed during sustained use?

The USB 3.2 Gen 1 interface caps throughput at 5 Gbps, so sustained reads and writes cannot exceed that bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.