We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifty brass F-type compression connectors for RG6 quad shield cable

Logico

Logico RG6 Quad Shield F-Type Compression Connector 50pcs

SKU CH-5A9P-VPSXM

F-Type compression connectors for RG6 quad-shield coaxial cable, brass construction, weather-tight seal, 50 pieces

  • 50 connectors cover large installations
  • Brass construction resists corrosion and lasts
  • Compression design seals out moisture
  • Works with any standard compression tool
  • Fits all quad-shield RG6 coaxial cables

RG6 Quad Shield F-Type Connectors

This pack supplies fifty compression connectors built for RG6 quad-shield coaxial cable. Each unit uses a metal and brass body to resist corrosion and survive repeated crimping. The design suits installers who need a reliable termination point for satellite, cable-TV or broadband distribution runs.

Replaces loose or corroded F-type fittings

Swapping out worn connectors restores signal integrity when picture break-up or modem errors appear. The compression style creates a weather-tight seal that outperforms twist-on or crimp-only alternatives in outdoor or damp locations. The upgrade is worthwhile whenever existing ends show oxidation, water ingress or mechanical fatigue.

Verify cable type and tool access

Confirm the coax is genuine RG6 quad-shield; other jacket thicknesses will not seat correctly in the compression cavity. Ensure a standard compression tool is available, as the connector cannot be fitted with pliers or a crimp die alone. Check that the installation site allows enough clearance for the tool to cycle fully.

Highlights

  • 50 connectors cover large installations
  • Brass construction resists corrosion and lasts
  • Compression design seals out moisture
  • Works with any standard compression tool
  • Fits all quad-shield RG6 coaxial cables

Specifications

BrandLogico

Questions about this item

What cable diameter do these 50 Logico RG6 Quad Shield F-Type compression connectors fit?

They are made for standard RG6 quad-shield coaxial cable, so the connector body and compression sleeve match that cable’s outer diameter and shielding thickness.

Which compression tool works with these Logico RG6 Quad Shield connectors, and what step do installers often miss?

Any standard F-type compression tool will crimp them; the step most people skip is trimming the braid and foil flush to the dielectric before inserting the cable so the sleeve seats evenly.

How long before the brass construction on these 50 connectors shows corrosion outdoors?

The brass body and nickel plating resist corrosion for years in typical exterior runs, but inspect the seal annually and replace any connector where the compression ring has loosened or moisture has entered.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.