Logico
Logico Cat6 UTP patch cable 1 ft green 10-pack
Ten green Cat6 UTP patch cables, each one foot long with 24 AWG stranded conductors, 550 MHz rating, 50-micron gold contacts, snag-free boots and T-568B wiring
- TypeCat 6
- Cat6
- Length1 ft.
- ColorGreen
- ShieldedUnshielded Twisted Pair (UTP)
- 10 cables per pack for multiple connections
- 24AWG stranded conductors meet Cat6 specs
- 550MHz bandwidth supports high-speed Ethernet
- 50 micron gold-plated contacts resist corrosion
- Snag-free boots protect plugs during installation
Ten-pack Cat6 patch cables
This ten-pack supplies ten green Cat6 UTP patch cables, each one foot long. They are built with 24AWG stranded conductors and 50-micron gold-plated contacts for reliable Ethernet connectivity. The moulded strain relief and snag-free boots protect the RJ45 plugs during installation and removal. Suitable for home, office or rack patching where short runs are needed.
Upgrade from Cat5e or damaged cords
These cables replace older Cat5e patch leads or any worn, kinked or loose-connection cords in a Gigabit network. The 550MHz rating and T-568B wiring support full Gigabit speeds, so the jump is worth it when existing cables cause drop-outs or fail certification tests. They also add colour-coded organisation for quick port identification in dense panels.
Headroom for Gigabit, not 10G
The 550MHz bandwidth comfortably handles 1GbE over the one-foot length with ample margin for alien crosstalk. It does not meet the tighter crosstalk limits required for 10GBASE-T, so runs needing 10GbE should use Cat6A or higher. The stranded construction keeps the cables flexible for patch-panel density but is not rated for in-wall or plenum installation.
Highlights
- 10 cables per pack for multiple connections
- 24AWG stranded conductors meet Cat6 specs
- 550MHz bandwidth supports high-speed Ethernet
- 50 micron gold-plated contacts resist corrosion
- Snag-free boots protect plugs during installation
Specifications
| Brand | LOGICO |
|---|---|
| Type | Cat 6 |
| Cat | 6 |
| Length | 1 ft. |
| Color | Green |
| Shielded | Unshielded Twisted Pair (UTP) |
Questions about this item
What size RJ45 ports and cable pathway do these 1 ft Cat6 cables need?
Each cable uses standard RJ45 plugs with 50 micron gold-plated contacts and a snag-free boot, so they fit any 8P8C jack and need only enough clearance for the boot and 24AWG stranded wire.
How do I install these patch cables without damaging the connectors?
Align the RJ45 plug with the jack, press straight in until the tab clicks, and route the cable so the molded strain relief prevents sharp bends at the connector.
When should I replace cables from this 10-pack?
Replace a cable if the snag-free boot tears, the strain relief cracks, the gold-plated contacts show wear or corrosion, or testing reveals errors beyond the 550 MHz Cat6 rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



