We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic RJ45 pass-through plugs in a bag of 100

Logico

Logico CAT6/CAT6A RJ45 8P8C Pass Through Modular Plug Unshielded 100pcs

SKU CH-VVM4-XYDWC

Pass-through RJ45 plugs for Cat6 and Cat6A UTP cable, 24–23 AWG, clear body verifies wiring order, 100 pieces

  • TypeRJ45 Connectors
  • Pass-through design speeds termination and lets you verify wire order
  • Gold-plated contacts resist corrosion for reliable signal transfer
  • Accepts 23 to 24 AWG conductors for Cat6 and Cat6A UTP cable
  • Insulation diameter range 0.95 to 1.05 mm ensures snug fit
  • 100 plugs per bag supports large or multiple wiring jobs

100-Pack Pass-Through RJ45 Connectors

These Logico RJ45 8P8C modular plugs come in a 100-piece bag for bulk Cat6 and Cat6A unshielded cabling jobs. The pass-through design lets installers verify conductor order before crimping, reducing wiring errors on TIA 568A or 568B schemes. Gold-plated contacts provide reliable conductivity for each termination.

Upgrade From Standard Closed-End Plugs

Traditional closed plugs hide the wire sequence until after crimping, forcing rework when a pair is crossed. The transparent pass-through body shows every conductor exiting the front so you can confirm the colour code before the tool closes. This jump is worth it on large installs where a single bad end wastes far more time than the extra cost per plug.

Suits Installers Running Cat6 or Cat6A UTP

The plugs accept 23 to 24 AWG solid or stranded conductors with insulation diameters of 0.95 to 1.05 mm and a round cable entry. They are built for unshielded twisted-pair cable only, so shielded or outdoor-rated runs need a different connector. Buyers terminating Cat5e or smaller-gauge wire should verify fit, and anyone needing shielded plugs must look elsewhere.

Highlights

  • Pass-through design speeds termination and lets you verify wire order
  • Gold-plated contacts resist corrosion for reliable signal transfer
  • Accepts 23 to 24 AWG conductors for Cat6 and Cat6A UTP cable
  • Insulation diameter range 0.95 to 1.05 mm ensures snug fit
  • 100 plugs per bag supports large or multiple wiring jobs

Specifications

TypeRJ45 Connectors

Questions about this item

What cable insulation diameter and AWG range do these Logico pass-through plugs accept?

They accept conductor insulation from 0.95 to 1.05 mm and support 24 AWG to 23 AWG solid or stranded conductors for Cat6 and Cat6A UTP cable.

How do you crimp these pass-through RJ45 plugs and what is the common mistake?

Insert wires through the clear plug, verify the 568A or 568B colour order visually, push the jacket fully in, then crimp and trim the excess in one pass-through crimp tool cycle; the common mistake is not seating the jacket deep enough before crimping.

What wears out when terminating many cables with these 100-piece plugs?

The gold-plated contacts on the plugs remain with each finished cable; the consumable items are the plugs themselves and the pass-through crimp tool blades, which dull after repeated trimming.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.