Logico
Logico Cat5e UTP Ethernet Cable Red 1 ft
A 1 ft red Cat5e UTP patch cable with 24AWG stranded conductors, 50 micron gold contacts, molded strain relief and a snag-free boot for reliable Ethernet links
- TypeCat 5E
- Cat5E
- Length1 ft.
- ColorRed
- ShieldedUnshielded Twisted Pair (UTP)
- Reliable short-range links with 1 ft Cat5e UTP cable
- Durable patch cords built from 24 AWG 4-pair stranded wire
- Certified 350 MHz bandwidth meets Cat5e spec
- Corrosion-resistant 50 micron gold-plated contacts
- Snag-free boot and moulded strain relief protect connectors
Short red patch cable for tight links
This Logico Cat5e UTP cable measures one foot and uses 24 AWG stranded conductors with gold-plated contacts. The red jacket makes it easy to identify in a crowded rack or desk setup. It is built to the T-568B wiring standard and rated for 350 MHz bandwidth.
Suited for short jumpers between a wall jack
Buyers who need longer runs across rooms or between floors should choose a different length. The unshielded design works well in typical office or home environments but is not intended for high-interference industrial settings.
Snaps into any RJ45 port without tools
The moulded strain relief and snag-free boot protect the connector during insertion and removal. Because the cable is very short, excess slack is minimal, but the fixed length cannot be adjusted if the devices sit slightly farther apart.
Highlights
- Reliable short-range links with 1 ft Cat5e UTP cable
- Durable patch cords built from 24 AWG 4-pair stranded wire
- Certified 350 MHz bandwidth meets Cat5e spec
- Corrosion-resistant 50 micron gold-plated contacts
- Snag-free boot and moulded strain relief protect connectors
Specifications
| Brand | LOGICO |
|---|---|
| Type | Cat 5E |
| Cat | 5E |
| Length | 1 ft. |
| Color | Red |
| Shielded | Unshielded Twisted Pair (UTP) |
Questions about this item
What devices must I already have to use this 1 ft Cat5e patch cable?
You need two devices with RJ45 Ethernet ports such as a router, switch, computer or network printer.
Will the T-568B wiring on this patch cord work with my existing T-568A wall jacks?
Yes, both ends follow the T-568B standard and interoperate with T-568A infrastructure.
How can I verify the 350 MHz Cat5e link is performing after I plug it in?
Check the link lights on both ports and run a speed test to confirm gigabit negotiation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



