Logico
Logico Cat5e UTP Ethernet Cable 15 ft Gray
A 15 ft gray Cat5e UTP patch cable with 24 AWG stranded conductors, 350 MHz bandwidth, gold-plated contacts, molded strain relief and snag-free boots for reliable Ethernet connections
- Cat5E
- Length15 ft.
- ColorGray
- 15 ft length reaches nearby devices
- 24 AWG stranded conductors meet Cat5e specs
- 350 MHz bandwidth supports gigabit speeds
- 50 micron gold contacts resist corrosion
- Snag-free boot protects the RJ45 clip
15 ft Cat5e UTP patch cable
This 15-foot Category 5e cable provides a wired Ethernet link for routers, switches, PCs or network-attached storage. It uses unshielded twisted-pair construction with a true 24 AWG stranded conductor to meet the category specification. The gray jacket suits home or office routing where a fixed 15-foot run is required.
Molded strain relief and snag-free boot
A molded strain relief stops the RJ45 plug from bending at sharp angles during routing behind desks or through trunking. The snag-free boot protects the latch when pulling the cable through tight spaces or crowded patch panels. Gold-plated contacts rated at 50 micron resist oxidation for a stable connection over repeated insertions.
Replaces shorter or worn Cat5 leads
The 350 MHz bandwidth and T-568B wiring support Gigabit Ethernet speeds where older Cat5 or damaged cables cause drop-outs. Builders needing longer runs, shielded cable or higher category ratings should select a different specification. This cable suits a direct device-to-switch link at the stated length.
Highlights
- 15 ft length reaches nearby devices
- 24 AWG stranded conductors meet Cat5e specs
- 350 MHz bandwidth supports gigabit speeds
- 50 micron gold contacts resist corrosion
- Snag-free boot protects the RJ45 clip
Specifications
| Cat | 5E |
|---|---|
| Length | 15 ft. |
| Color | Gray |
Questions about this item
What speed does the Cat5e 350 MHz rating actually deliver?
The cable meets Category 5e specifications tested at 350 MHz, providing bandwidth for Gigabit Ethernet over its 15 ft length.
Will the snag-free boot and moulded strain relief fit a standard keystone jack or wall plate?
Yes, the RJ45 plugs follow the T-568B wiring standard and the snag-free boot is sized for standard ports and keystone openings.
Do I need a punch-down tool, or is this a plug-and-play patch cord?
It arrives with RJ45 connectors already crimped on both ends, so you simply plug it in; no punch-down tool or termination is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
