Loc-Line
Loc-Line 49421 50 ft coil hose 1/4 in fluid
A 50 ft coil hose with 1/4 in connections resists corrosion and water while handling oils, solvents and coolants
- 50 ft pre-assembled coil hose ready for immediate use
- 1/4 in connection diameter fits standard fittings
- Acetal copolymer construction resists corrosion and water
- Compatible with oils, solvents, gasoline and common chemicals
- Includes element clamps for secure attachment
Coil hose for machine coolant and lubricant lines
This Loc-Line 49421 coil hose is a pre-assembled 50 ft length with a 1/4 in connection diameter. It is made from acetal copolymer and includes element clamps for secure attachment. The hose is designed for delivering coolant, lubricant or air directly to the cutting zone on machine tools.
Chemical resistance defines the practical limits
The acetal copolymer construction resists corrosion and water, and is compatible with acetone, alcohol, dish detergents, ethyl, gasoline, grease, lacquer solvents, oils and sodium hydroxide. Fluids outside this listed group may degrade the material or cause leaks, so verify the exact chemicals used in your application before installing.
Check your machine fittings
Ensure the equipment uses a 1/4 in hose connection and that the 50 ft length suits the distance between the supply and the nozzle without excess slack or tension. Confirm that the included element clamps match the mounting points on your Loc-Line segments or manifold.
Highlights
- 50 ft pre-assembled coil hose ready for immediate use
- 1/4 in connection diameter fits standard fittings
- Acetal copolymer construction resists corrosion and water
- Compatible with oils, solvents, gasoline and common chemicals
- Includes element clamps for secure attachment
Specifications
| Brand | Loc-Line |
|---|---|
| Model | 49421 |
Questions about this item
Should I pick the 50 ft coil or a shorter length for my setup?
The 49421 comes as a single 50 ft coil; if your machine needs less reach you can trim it, but no shorter pre-cut version is offered.
What does the 50 ft length mean when the hose is pressurised on a CNC coolant line?
At full extension you have 50 ft of 1/4 in bore between the pump and the nozzle; friction loss will increase with flow rate, so size the pump accordingly.
How does the 1/4 in connection diameter limit the fittings I can use?
The hose ends accept standard 1/4 in Loc-Line elements and clamps only; larger or threaded fittings will not seal on this bore size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Westward
Westward 5NUE7 4-Jaw Hydraulic Coupler Ball Check 6000 PSI Pack of 5
$14.99
0.00017729BTC
In stock