We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular box with three DisplayPort sockets and a push button on top

LinSeek DisplayPort Bi-Directional Switch 4K@60Hz 2x1 1x2

SKU CH-DJ3R-9J7AR

Bi-directional DisplayPort switch toggles between two sources on one display or one source across two displays at 4K 60 Hz

  • TypeDisplayPort
  • Changer TypeUSB
  • ColorBlack
  • Ports3
  • Input Connector3
  • Maximum Resolutions2.3 x 2.06 x 0.68
  • Bi-directional switching lets one source drive two displays or two sources share one display
  • 4K at 60 Hz and 1080p at 120 Hz supported with 30 Gbps bandwidth
  • Push-button control with LED indicator shows the active port instantly
  • Plug-and-play operation requires no driver installation
  • Micro-USB 5 V power cable included for stable signal performance

Bi-Directional 4K@60Hz Switch

The LinSeek 760066588071 is a DisplayPort bi-directional switch that works as a 2×1 selector or a 1×2 splitter for PCs, laptops, monitors, TVs and projectors. It supports 4K at 60 Hz and 1080p at 120 Hz with a 30 Gbps bandwidth and backward compatibility with DP 1.0, 1.1 and 1.2. Only one display is active at a time.

Sustained Signal Integrity

The unit draws power from an included 5 V 1 A Micro-USB cable to maintain a stable 30 Gbps link during long sessions, preventing the signal drop-outs that bus-powered dongles often suffer. It handles 4K@60Hz and 1080P@120Hz continuously without lag or picture-quality loss, provided the total cable run stays within the recommended 3 metre limit.

Simple Button Switching

Installation is driver-free: connect the sources, the display and the USB power cable, then press the front button to toggle the active port; an LED shows which path is live. The manual warns that the total DisplayPort cable length should not exceed 3 metres, and the supply must come from a separate 5 V charger, which is not included. No automatic switching occurs.

Highlights

  • Bi-directional switching lets one source drive two displays or two sources share one display
  • 4K at 60 Hz and 1080p at 120 Hz supported with 30 Gbps bandwidth
  • Push-button control with LED indicator shows the active port instantly
  • Plug-and-play operation requires no driver installation
  • Micro-USB 5 V power cable included for stable signal performance

Specifications

BrandLinSeek
Model760066588071
TypeDisplayPort
Changer TypeUSB
ColorBlack
Ports3
Input Connector3
Maximum Resolutions2.3 x 2.06 x 0.68
Dimensions2.3 in x 2.06 in x 0.68 in
Weight0.1 kilograms

Questions about this item

Does the LinSeek 760066588071 switch generate noticeable heat or fan noise when left powered on all day?

The unit is a passive DisplayPort 1.2 switch with no fan; it draws 5 V at 1 A through the included Micro-USB cable and runs cool during continuous use.

What cable or power source must I already have to operate the LinSeek 760066588071 switch?

A USB power adapter capable of 5 V 1 A is required; the package supplies the Micro-USB cable but not the charger.

Will the LinSeek 760066588071 work with my older DP 1.1 monitor and DP 1.0 laptop?

Yes, the switch is backward compatible with DisplayPort 1.0, 1.1 and 1.2, so legacy sources and displays connect without issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.