We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Linksys power adapter, compact black brick with 5.5x2.5mm barrel plug

Linksys

Linksys MT10-1050200-A1 power adapter 5V 2A 5.5x2.5mm

SKU CH-98DX-W5M5G MPN MT10-1050200-A1

A 5 V 2 A power adapter with a 5.5 × 2.5 mm barrel plug for Linksys networking gear

  • Powers devices reliably with genuine Linksys Cisco design
  • Delivers steady 5V 2A output for compatible equipment
  • Accepts 100-120V input for standard household supply
  • Fits hardware needing 5.5x2.5mm barrel connector
  • Tested for short-circuit and overheat protection

Linksys 5 V 2 A power adapter

The Linksys MT10-1050200-A1 is a genuine AC power adapter that delivers 5 V at 2 A through a 5.5 mm by 2.5 mm barrel connector. It accepts an input of 100-120 V at 0.5 A across 50/60 Hz and includes safeguards against incorrect voltage, short circuit and internal overheating. This unit is intended as a direct replacement for compatible Linksys networking hardware.

Suits owners of matching Linksys devices

Buyers who need a replacement charger for a Linksys product specifying 5 V 2 A with a 5.5x2.5 mm plug will find this adapter fits the requirement. It is not suitable for devices that demand a different voltage, a higher current rating or a different connector size or polarity.

5.5x2.5 mm barrel connector

The connector dimensions are the single specification that determines whether this adapter will physically mate with your equipment. Verify that the device you are powering uses a 5.5 mm outer diameter and 2.5 mm inner diameter barrel jack with centre-positive polarity before purchasing.

Highlights

  • Powers devices reliably with genuine Linksys Cisco design
  • Delivers steady 5V 2A output for compatible equipment
  • Accepts 100-120V input for standard household supply
  • Fits hardware needing 5.5x2.5mm barrel connector
  • Tested for short-circuit and overheat protection

Specifications

ModelMT10-1050200-A1

Questions about this item

What voltage and connector must my Linksys device require for this MT10-1050200-A1 adapter to power it?

Your device must accept 5V at 2A through a 5.5x2.5mm barrel connector.

Will this adapter safely power an older Linksys router that also uses a 5.5x2.5mm jack?

Yes, if that router is rated for 5V 2A input; the adapter includes safeguards against incorrect voltage, short circuit and internal overheating.

How can I confirm the MT10-1050200-A1 is working correctly after I plug it in?

The adapter is tested for fully functional operation with no broken wires, twisted cables or loose internal particles; a steady power LED on your device indicates proper supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.