We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic eARC audio extractor with 2.1M cable

LiNKFOR XUNULK110 eARC Audio Extractor, 2.1M Cable, 192kHz

SKU CH-RVKP-JEJ18

Converts a TV's HDMI eARC/ARC signal to optical audio at 24bit/192kHz, supporting PCM 2.0, Dolby 5.1 and DTS 5.1 with a 2.1M cable included

  • Specifications30 grams, 5, Plastic, XUNULK110
  • Terminal GendereARC Audio Extractor / XUNULK110
  • Cable Jakcet TypePlastic
  • Weight30 grams
  • Package ContentseARC Audio Extractor
  • Disclaimernot_applicable
  • High-resolution 24-bit/192kHz audio from eARC sources
  • Converts HDMI eARC/ARC to optical for soundbars and headphones
  • Plug-and-play with no drivers or software required
  • Supports PCM 2.0, Dolby 5.1 and DTS 5.1 surround formats
  • Includes 2.1m cable for flexible TV-to-audio placement

LiNKFOR XUNULK110 eARC Audio Extractor

The LiNKFOR XUNULK110 converts a TV HDMI eARC or ARC port into an optical digital audio output. It accepts 24-bit 192 kHz sampling and passes PCM 2.0, Dolby 5.1 and DTS 5.1 formats. A 2.1 m cable is included and no drivers are required.

Suits TV-to-soundbar setups.

This extractor works when the TV HDMI port carries an eARC or ARC label and the soundbar or home-theater system has an optical input. Wireless headphones with an optical base station also benefit. Buyers who need HDMI CEC volume control should look elsewhere because the optical link cannot carry those commands.

192 kHz 24-bit sampling decides fit

The converter supports a maximum 24-bit 192 kHz sample rate across PCM 2.0, Dolby 5.1 and DTS 5.1. If the source or sink device is limited to lower rates the extractor will still operate but cannot deliver its full resolution.

Highlights

  • High-resolution 24-bit/192kHz audio from eARC sources
  • Converts HDMI eARC/ARC to optical for soundbars and headphones
  • Plug-and-play with no drivers or software required
  • Supports PCM 2.0, Dolby 5.1 and DTS 5.1 surround formats
  • Includes 2.1m cable for flexible TV-to-audio placement

Specifications

BrandLiNKFOR
SeriesXUNULK110
ModelXUNULK110
Part NumberXUNULK110
Specifications30 grams, 5, Plastic, XUNULK110
Terminal GendereARC Audio Extractor / XUNULK110
Cable Jakcet TypePlastic
Weight30 grams
Package ContentseARC Audio Extractor
Disclaimernot_applicable

Questions about this item

Does my TV need an HDMI port labelled eARC or ARC for this extractor to work?

Yes — the TV HDMI port must carry the eARC or ARC logo for the XUNULK110 to receive a signal.

Will my existing soundbar with only an optical input accept audio from this unit?

The extractor outputs PCM 2.0, Dolby 5.1 and DTS 5.1 over optical, so any soundbar with an optical input can decode those formats.

How can I confirm the 24-bit 192 kHz stream is active after I connect everything?

The front-panel audio signal indicator lights when a valid digital stream is present, showing the extractor is passing audio.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.