We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black HDMI cable with male connectors on both ends, ten feet long

Link Depot Corp.

Link Depot Corp. HHS-10 HDMI cable 10 ft

SKU CH-EVBE-71Z4G MPN HHS-10

A 10 ft HDMI to HDMI cable with copper conductors and shielding, compliant with HDMI 1.3 and backward compatible with versions 1.1 and 1.2, supporting 340 MHz bandwidth for high-definition devices

  • TypeHDMI to HDMI
  • Length10 ft.
  • Cable Length10 ft.
  • SpecificationsHDMI is backward compatible with v. 1.1 ,1.2 and 1.3. HDMI i
  • 10 ft length reaches distant displays
  • HDMI 1.3 support carries 10.2 Gbps bandwidth
  • Backward compatible with HDMI 1.1 and 1.2 devices
  • Copper conductor with shielding protects signal integrity
  • RoHS certified materials reduce environmental impact

10 ft Ultra High Speed HDMI Cable

This 10 ft HDMI-to-HDMI cable carries digital audio and video between televisions, monitors and source devices. It uses copper conductors with shielding to maintain signal integrity over the full length. The cable meets RoHS environmental requirements and is supplied new.

Installers needing a 10 ft link

The 10 ft length suits setups where the source and display are separated by a moderate distance such as living-room TVs or conference-room projectors. Buyers who need a shorter run to reduce clutter or a longer run for whole-home distribution should look at other lengths.

HDMI 1.3 bandwidth rating

The cable is rated to the HDMI 1.3 specification with a single-link bandwidth of 340 MHz or 10.2 Gbps, an increase from the earlier 165 MHz and 4.95 Gbps. This figure determines whether the cable can handle the resolution and refresh rate your equipment requires.

Highlights

  • 10 ft length reaches distant displays
  • HDMI 1.3 support carries 10.2 Gbps bandwidth
  • Backward compatible with HDMI 1.1 and 1.2 devices
  • Copper conductor with shielding protects signal integrity
  • RoHS certified materials reduce environmental impact

Specifications

BrandLink Depot
ModelHHS-10
TypeHDMI to HDMI
Length10 ft.
Cable Length10 ft.
SpecificationsHDMI is backward compatible with v. 1.1 ,1.2 and 1.3.
HDMI increased its single-link bandwidth from 165 MHz (4.95 gigabits per second) to 340 MHz (10.2 Gbps) to support the demands of future high definition display devices, such as higher resolution, Deep Color, and high frame rates.
HDMI supports 30-bit, 36-bit and 48-bit (RGB or YCbCr) color depths, up from 24-bit depths in previous versions of HDMI specification. A simple way of saying, "you get billions of colors" for better contrast ratio; more natural, vivid and accurate color display.
HDMI supports LipSync technology. Its auto
Shipping weight0.13 kg
Package size225 × 168 × 60 mm

Questions about this item

What HDMI connector type does this 10 ft cable use on both ends?

The cable has an HDMI 1.3 male connector on each end for a direct HDMI-to-HDMI link.

How should the cable be routed during installation to avoid signal issues?

Lay the 10 ft copper conductor without sharp bends or kinks; tight bends can damage the shielding and degrade the 10.2 Gbps bandwidth.

When might this cable need replacement in a permanent setup?

Replace it if the copper conductors or shielding show physical wear, corrosion on the HDMI 1.3 plugs, or if bandwidth drops below 10.2 Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.