We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic adapter with 2.1mm snap connector and Dell 90W Mini Bondi tip

Lind

Lind CBLOPF02850 2.1mm Snap 41 Dell 90W Mini Bondi gender changer

SKU CH-3FJ6-H2NHT

A 2.1 mm snap gender changer adapts a Dell 90 W Mini Bondi power connector

  • 1 mm snap connector fits Dell 90 W Mini Bondi power ports
  • Gender-changer design converts plug polarity for direct compatibility
  • Lind Electronics build ensures reliable power delivery
  • Manufacturer part CBLOPF02850 identifies exact replacement unit
  • First listed by maker in 2024 for current supply

2.1mm Snap 41 Dell 90W adapter

This Lind Electronics gender changer adapts a 2.1mm snap connector to a Dell 90W Mini Bondi plug. It serves technicians and owners of compatible Dell systems who need to connect an existing power source to the Mini Bondi input. The adapter is supplied new and carries manufacturer part number CBLOPF02850.

Snap-to-Mini-Bondi conversion

The 2.1mm snap end mates with matching barrel or snap connectors on power bricks or cables. The opposite end presents the Dell Mini Bondi interface required by supported laptops and docks. This single-piece adapter replaces a mismatched cable without requiring soldering or a replacement power supply.

90W power pass-through headroom

The adapter passes up to 90W, covering Dell devices that draw at or below that rating. It will not support systems that require higher wattage or a different connector geometry. Users needing a different tip size or a higher current rating must select an alternative adapter.

Highlights

  • 1 mm snap connector fits Dell 90 W Mini Bondi power ports
  • Gender-changer design converts plug polarity for direct compatibility
  • Lind Electronics build ensures reliable power delivery
  • Manufacturer part CBLOPF02850 identifies exact replacement unit
  • First listed by maker in 2024 for current supply

Specifications

BrandLind Electronics

Questions about this item

Will the 2.1 mm snap connector wear out and need replacement after repeated mating cycles?

The snap connector is a passive mechanical interface; it has no moving contacts that degrade, so no scheduled replacement is required under normal use.

What is the first limit reached when the adapter runs continuously at the 90 W rating?

The 90 W rating itself is the design ceiling — sustained loads at that level will not exceed the adapter’s specified capacity.

Does the gender changer generate noticeable heat or draw extra power when left plugged in all day?

As a passive gender changer it adds no active circuitry, so it produces no measurable heat and draws no power of its own.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.