We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal PDU with hardwire terminal blocks and maintenance bypass breaker

Liebert

Liebert PD2-HDWR-MBS 30 A PDU 208 V 6-Outlet Hardwire MBS

SKU CH-Q19P-FSXG1 MPN PD2-HDWR-MBS

Hardwired 30 A PDU with maintenance bypass breaker for compatible 208 V UPS units

  • FeaturesProduct Name:PD2-HDWR-MBS 6-Outlets PDU Output Receptacles:H
  • Weight6.00 lb
  • Maintenance bypass enables hot-swap UPS replacement without power interruption
  • Hardwired 208 V input and output via terminal block 3W + G
  • Rated 30 A continuous current for high-density rack loads
  • Compatible with GXT3 and GXT4 5000 and 6000 VA 208 V UPS units
  • Removable plug-in design simplifies installation and service access

Liebert 30 A PDU with Maintenance Bypass

This power distribution unit delivers hardwired input and output connections rated at 30 A and 208 V. It is designed for data-centre and server-room operators who need to service a UPS without interrupting power to connected loads. The unit plugs directly into the rear of compatible Liebert GXT UPS models and provides six hardwire terminal-block outputs.

Maintenance bypass breaker enables hot-swap UPS

The integrated maintenance bypass breaker allows the entire UPS to be removed or replaced while critical equipment remains powered. This capability reduces downtime during scheduled maintenance or unexpected UPS failure and avoids the need for external bypass panels or additional wiring.

Hardwire terminal-block connections for 30

Both input and output use a three-wire-plus-ground hardwire terminal block, so the PDU must be installed by qualified electricians on a 30 A 208 V circuit. It is not suited for plug-and-play rack deployments or environments that require standard IEC or NEMA receptacles.

Highlights

  • Maintenance bypass enables hot-swap UPS replacement without power interruption
  • Hardwired 208 V input and output via terminal block 3W + G
  • Rated 30 A continuous current for high-density rack loads
  • Compatible with GXT3 and GXT4 5000 and 6000 VA 208 V UPS units
  • Removable plug-in design simplifies installation and service access

Specifications

BrandLiebert
ModelPD2-HDWR-MBS
FeaturesProduct Name:PD2-HDWR-MBS 6-Outlets PDU
Output Receptacles:Hardwire Terminal Block 3W + G
Product Type:PDU
Current:30 A
Input Receptacles:Hardwire Terminal Block 3W + G
Weight6.00 lb
Shipping weight3.63 kg
Package size533 × 249 × 241 mm

Questions about this item

Will the hardwire terminal block on this PDU need periodic retorquing?

The hardwire terminal block should be checked and retorqued during scheduled maintenance to ensure secure connections under continuous 30 A load.

What limits continuous operation at the full 30 A rating?

The 30 A breaker and hardwire terminals set the sustained current limit; exceeding 30 A will trip the maintenance bypass breaker.

How much heat does the unit produce when passing 30 A all day?

The PDU itself adds minimal heat; nearly all thermal load comes from the connected UPS and downstream equipment drawing up to 30 A at 208 V.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.