Liebert
Liebert PD2-102 8-Outlet PDU 4×5-20R 4×L6-20R 60A Hardwire
Distributes 60 A three-phase power to four NEMA 5-20R and four NEMA L6-20R outlets via hardwired input
- TypeBasic
- FeaturesProduct Name:PD2-102 8-Outlets PDU Output Receptacles:4 x NE
- Weight6.60 lb
- Distributes power to eight devices from a single 60 A feed
- Four NEMA 5-20R outlets support standard 120 V equipment
- Four NEMA L6-20R locking outlets secure 208 V connections
- Hardwire terminal block enables permanent three-wire-plus-ground installation
- Lightweight 6.60 lb chassis simplifies rack mounting
Purpose-Built Power Distribution
The Liebert PD2-102 is a basic power distribution unit rated for 60 A input current. It accepts a hardwire terminal block with three wires plus ground for permanent installation. Eight output receptacles provide four NEMA 5-20R and four NEMA L6-20R connections for attached equipment.
Ideal For Mixed 120 V and 208 V Loads
This unit suits racks needing both 120 V and 208 V outlets from a single 60 A feed. It is not for installations requiring switched or metered outlets, remote monitoring, or a plug-in input cord. Buyers needing more than four connections per voltage type should look at higher-density PDUs.
Deciding Specification Is the 60 A Hardwire Input
The hardwire terminal block rated at 60 A determines whether this PDU matches the available branch circuit and upstream breaker. Verify the feed provides three conductors plus ground before ordering.
Highlights
- Distributes power to eight devices from a single 60 A feed
- Four NEMA 5-20R outlets support standard 120 V equipment
- Four NEMA L6-20R locking outlets secure 208 V connections
- Hardwire terminal block enables permanent three-wire-plus-ground installation
- Lightweight 6.60 lb chassis simplifies rack mounting
Specifications
| Brand | Liebert |
|---|---|
| Model | PD2-102 |
| Type | Basic |
| Features | Product Name:PD2-102 8-Outlets PDU Output Receptacles:4 x NEMA 5-20R 4 x NEMA L6-20R Number of Output Connections:4 Product Type:PDU Current:60 A Input Receptacles:Hardwire Terminal Block 3W + G |
| Weight | 6.60 lb |
| Shipping weight | 3.63 kg |
| Package size | 530 × 310 × 230 mm |
Questions about this item
How much heat or noise does the PD2-102 produce when it runs continuously?
The PD2-102 is a basic power distribution unit with no fans or active cooling, so it generates no audible noise and only minimal passive heat while distributing up to 60 A.
What electrical supply must already be in place for the PD2-102 to operate?
The PD2-102 requires a hardwired 3-wire plus ground feed rated for 60 A at 208 V or 120 V, terminated at its terminal block before any outlets become live.
Can the PD2-102 power older servers that still use NEMA 5-20R or L6-20R plugs?
Yes, the unit provides four NEMA 5-20R and four NEMA L6-20R receptacles, matching the plugs found on many legacy 20 A servers and network gear.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



