Lexar
Lexar LD4S16G32C22ST-HGN 16GB DDR4 3200 laptop RAM
16 GB DDR4 3200 SO-DIMM laptop memory with CL22 latency and 1.20 V operation
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 16 GB capacity for smooth multitasking
- DDR4 3200 speed for fast data transfer
- CL22 latency for responsive performance
- 20 V operation for lower power draw
- 260-pin SO-DIMM fits standard laptop slots
16GB DDR4 SO-DIMM for laptop upgrades
This Lexar module delivers 16GB of DDR4 memory in a 260-pin SO-DIMM form factor. It runs at 3200 MT/s with a CAS latency of CL22 and operates at 1.20V. The unbuffered, non-ECC design targets standard notebook platforms that accept DDR4 SO-DIMMs.
Simple slot insertion with no heat spreader
Installation consists of aligning the notch on the 260-pin edge connector and pressing the module into the SO-DIMM slot until the retention clips engage. Because the module lacks a heat spreader, it fits tight clearance spaces but offers no thermal buffer; ensure the laptop chassis provides adequate airflow over the bare PCB.
Steady JEDEC operation under sustained load
At the rated 3200 speed and CL22 timing the module follows standard JEDEC specifications without overclocking headroom. Continuous workloads such as video rendering or virtual machines will run at the declared 1.20V with no factory-supported XMP profiles to increase frequency or tighten latency.
Highlights
- 16 GB capacity for smooth multitasking
- DDR4 3200 speed for fast data transfer
- CL22 latency for responsive performance
- 20 V operation for lower power draw
- 260-pin SO-DIMM fits standard laptop slots
Specifications
| Brand | Lexar |
|---|---|
| Series | Bulk Pack Tray |
| Model | LD4S16G32C22ST-HGN |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Shipping weight | 0.09 kg |
| Package size | 76 × 25 × 3 mm |
Questions about this item
How can I confirm the LD4S16G32C22ST-HGN is running at 3200 MT/s after installation?
Open Task Manager or CPU-Z and verify the memory speed reads 3200 MT/s and CAS latency shows CL22.
What comes in the bulk pack tray and do I need any extra parts?
The tray contains the 16 GB 260-pin DDR4 SO-DIMM only; no heat spreader, screws or tools are included or required.
Which version should I choose if my laptop only supports 1.20 V DDR4 SO-DIMMs?
This module is a 1.20 V unbuffered non-ECC DDR4 3200 SO-DIMM, matching that requirement exactly.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



