We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50 cm cable with M.2 and EDSFF connectors

LetLinkSo

LetLinkSo LLS-CB-MTED-01 infiniband cable 50 cm 32 GT/s

SKU CH-R23A-Y7WSB

Converts an M.2 slot to EDSFF E1/E3 with 50 cm cable at 32 GT/s per lane

  • TypeM.2 to EDSFF
  • ColorBlack
  • Length1.6 feet (50 cm)
  • Connector Number2
  • Connector Detail1 x M.2 to 1 x EDSFF
  • Terminal GenderMale to Male

Connector Type Right Exit

  • Expands storage using idle M.2 slots instead of costly board swaps
  • Delivers 32 GT/s per lane for full PCIe 5.0 x4 128Gbps throughput
  • Works with E1.S E1.L E3.S E3.L drives in 1U 2U servers
  • 15P SATA power prevents throttling under heavy SSD loads
  • 50 cm right-exit copper cable fits tight chassis layouts

M.2 to EDSFF adapter cable

This 50 cm cable converts an idle M.2 slot into a standard EDSFF interface for E1.S, E1.L, E3.S and E3.L SSDs. It carries a male-to-male copper conductor rated at 32 GT/s per lane. A 15-pin SATA power connector supplies the drive, avoiding motherboard or system replacement.

Suited for servers and workstations with spare M.2

Builders who need to add EDSFF storage without a platform change will benefit. Buyers who lack a free M.2 slot or who require a different connector type should look elsewhere. The right-angle exit helps in tight 1U or 2U chassis where space is limited.

PCIe 5.0 x4 bandwidth with 128 Gbps headroom

The link runs at full PCIe 5.0 x4 speed and remains backward compatible with PCIe 4.0 and 3.0 devices. It handles AI, big-data and high-frequency trading workloads at line rate. Very long cable runs or multi-drive arrays needing more than one lane per drive will exceed the single-cable capacity.

Highlights

  • Expands storage using idle M.2 slots instead of costly board swaps
  • Delivers 32 GT/s per lane for full PCIe 5.0 x4 128Gbps throughput
  • Works with E1.S E1.L E3.S E3.L drives in 1U 2U servers
  • 15P SATA power prevents throttling under heavy SSD loads
  • 50 cm right-exit copper cable fits tight chassis layouts

Specifications

BrandLetLinkSo
ModelLLS-CB-MTED-01
TypeM.2 to EDSFF
ColorBlack
Length1.6 feet (50 cm)
Connector Number2
Connector Detail1 x M.2 to 1 x EDSFF
Terminal GenderMale to Male
Speed32 GT/s (per lane)
ConductorCopper Conductor
FeaturesReduce Upgrade Costs

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What free slot does my system need for the M.2 end of this adapter?

A spare M.2 connector that can run PCIe 5.0 x4 is required; the adapter plugs directly into it.

Will a PCIe 4.0 or 3.0 M.2 slot still drive an EDSFF SSD at full speed?

The link is backward compatible with PCIe 4.0 and 3.0, but the SSD will run at the slot's lower 32 GT/s per lane limit.

How can I confirm the 15-pin SATA power is delivering current after installation?

The EDSFF SSD should appear in the BIOS or OS without throttling; stable detection under load shows the power rail is active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.