We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Lenovo silver metal 19 inch four post rail kit .8 by 1.8 by 32.7 inches

Lenovo

Lenovo System Networking Recessed 19" 4 Post Rail Kit (NeXtScale)

SKU CH-2E5A-VGKSY

Mounts a network switch in a 19-inch rack with recessed four-post rails weighing 1.32 lb

  • TypeMounting
  • Fits standard 19" racks for secure switch mounting
  • Recessed 4-post design supports deeper network equipment
  • Compatible with IBM RackSwitch G8264 for direct installation
  • Lightweight 1.32 lb aluminium construction eases handling
  • Slim .8" height preserves vertical rack space

Recessed 19-inch 4-post rail kit

This Lenovo rail kit mounts a network switch in a standard 19-inch rack using four posts. The recessed design positions the switch deeper inside the cabinet for improved airflow and cable management. It is built for the IBM System Networking RackSwitch G8264. The kit weighs approximately 1.32 lb.

Sustained-load behaviour

The steel rails support the switch continuously without sagging across the 32.7-inch depth. Fixed mounting points keep the chassis secure during vibration from rack cooling fans. No moving parts or sliding mechanisms are present, so alignment remains stable over years of operation. The 0.8-inch height profile preserves vertical rack space for adjacent equipment.

Upgrade context

This kit replaces missing or damaged original rails for the G8264 switch. It is also the correct choice when converting a two-post installation to a four-post recessed layout. The jump is worth it when the switch must sit deeper in the rack to clear rear cable managers or to match neighbouring hardware depth. It does not fit switches outside the named compatibility list.

Highlights

  • Fits standard 19" racks for secure switch mounting
  • Recessed 4-post design supports deeper network equipment
  • Compatible with IBM RackSwitch G8264 for direct installation
  • Lightweight 1.32 lb aluminium construction eases handling
  • Slim .8" height preserves vertical rack space

Specifications

BrandLenovo
TypeMounting

Questions about this item

Does the 1.32 lb rail kit generate any noise or heat during continuous operation?

The kit is a passive metal assembly with no moving parts, so it produces no noise or heat.

What existing rack hardware must I already have to install this 19-inch 4-post kit?

You need a standard 19-inch four-post rack or cabinet with square or threaded mounting holes.

Will the 32.7-inch depth fit alongside an older IBM RackSwitch G8264 in the same cabinet?

Yes, the kit is listed as compatible with the IBM System Networking RackSwitch G8264 and matches standard 19-inch rack depth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.