Lenovo
Lenovo 5m MPO to 4xLC Breakout OM4 MMF Fibre Optic Cable
A 5-metre OM4 multi-mode breakout cable splits one MPO connector into four LC male ends for high-density network links
- TypeFiber Optic
- Length16.40 ft
- Connector DetailMPO Network
- 5 m OM4 multi-mode fibre delivers high bandwidth for short-reach links
- MPO to 4×LC breakout splits one trunk into four duplex connections
- 40 ft length suits rack-to-rack or row-to-row runs
- Factory-terminated connectors ensure low insertion loss and reliable mating
- Lenovo-branded cable matches qualified server and switch optics
5m MPO to 4xLC OM4 Breakout Cable
This Lenovo fibre optic cable splits a single MPO connector into four LC male connectors. It uses OM4 multi-mode fibre and measures 16.40 ft in length. The assembly is designed for direct connection between compatible network equipment.
Suits high-density patch panels and transceivers
The breakout design fits links that require an MPO trunk on one side and four separate LC ports on the other. It will not suit installations that need single-fibre LC duplex pairs or cables with different connector types.
OM4 multi-mode fibre specification
The cable uses OM4 graded-index multi-mode fibre optimised for 16.40 ft runs. This bandwidth grade determines the maximum supported data rate and distance for the linked transceivers.
Highlights
- 5 m OM4 multi-mode fibre delivers high bandwidth for short-reach links
- MPO to 4×LC breakout splits one trunk into four duplex connections
- 40 ft length suits rack-to-rack or row-to-row runs
- Factory-terminated connectors ensure low insertion loss and reliable mating
- Lenovo-branded cable matches qualified server and switch optics
Specifications
| Brand | Lenovo |
|---|---|
| Type | Fiber Optic |
| Length | 16.40 ft |
| Connector Detail | MPO Network |
Questions about this item
How do I confirm the MPO-to-4xLC breakout is passing light correctly after installation?
Use a visual fault locator or power meter at each of the four LC ends to verify continuity and acceptable insertion loss across the OM4 multi-mode fibre.
What connectors and cable type are included, and is any polishing or termination kit required?
The cable arrives with a single MPO connector on one end and four LC male connectors on the other, pre-terminated on OM4 multi-mode fibre; no additional polishing or termination kits are needed.
Which length should I select for a 5-metre rack-to-rack run?
The 16.40 ft (5 m) length matches a standard 5-metre rack-to-rack distance, providing the exact reach without excess slack.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



