Lenkeng Technology Co,. Ltd 1080p HDMI Wireless Extender Kit 200 m
- 150 m / 500 ft.
- 1080P
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Lenkeng Technology Co,. Ltd
Transmits 1080P 60Hz HDMI video wirelessly up to 150 metres with a local loop-out port and IR remote control
Option 1 TX and 1 RX kit
This transmitter and receiver kit sends 1080P video at 60 Hz up to 150 metres without cables. It suits installers who need a second display in another room where running HDMI is impractical. The local HDMI loop-out on the transmitter lets the source screen stay active while the wireless feed runs to the remote TV. Infrared extension carries remote commands back to the source device.
Video is encoded with H.264 to keep the stream stable over the wireless link. The link complies with HDCP 1.2 for protected content from Blu-ray players or cable boxes. The spec lists a 200 metre open-space figure and a 150 metre typical figure for planning. No fan or active cooling is mentioned, so the units run silently.
Both units ship in grey housings and are described as plug-and-play with automatic display-mode detection. The transmitter provides one HDMI loop-out alongside the wireless output, while the receiver delivers a single HDMI output. IR extender cables are supported for source control from the remote location. No software setup or network configuration is required.
| Distance | 150 m / 500 ft. |
|---|---|
| Resolution Support | 1080P |
| Color | grey |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Connect the video source to the transmitter HDMI input, link the first TV to the transmitter HDMI loop-out with a cable, place the receiver up to 150 m away and connect the second TV to its HDMI output; power both units and the system pairs automatically.
Keep the transmitter and receiver vents clear of dust, verify the IR emitter stays aligned with the source device, and reseat HDMI cables if the 1080P@60Hz signal drops; no firmware updates or consumable parts are required.
The wireless link is rated for 150 m line-of-sight; walls or interference will reduce usable range before the H.264 compression or HDCP 1.2 handshake becomes a bottleneck.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?