We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey wireless HDMI extender kit with one sender and two receivers

Lenkeng Technology Co,. Ltd

Lenkeng Technology Co,. Ltd Wireless 1080P Extender Kit 1 Sender 2 Receivers 150m Grey

SKU CH-4ZK3-P0PBZ

Wirelessly extends 1080P video and audio up to 150 metres from one sender to two receivers with HDMI loop-out and IR remote control

  • Distance150 m / 500 ft.
  • Resolution Support1080P
  • Colorgrey

Option 1 TX and 2 RX kit

  • Place your 1080P TV anywhere without HDMI cable limits
  • Stream wireless 1080P audio and video up to 656 feet to another room
  • Connect two 1080P HD TVs to share the same video source simultaneously
  • Transmit from Blu-ray player, DVR or cable box with 1920 x 1080 resolution
  • Plug and play setup with automatic display configuration and IR remote extension

Wireless 1080P Extender Kit

This wireless HDMI extender kit includes one transmitter and two receivers, allowing a single 1080P source to feed a local display and two remote screens simultaneously. It is built for installers and homeowners who need to place televisions or projectors beyond the reach of standard cables without running wires through walls. The system transmits 1920 x 1080 resolution at 60 Hz using H.264 compression over a wireless link rated for 150 metres or 500 feet line of sight.

Upgrade from wired HDMI runs

The kit replaces long HDMI cables that are limited to roughly 10 metres for 1080P signals and eliminates the cost and labour of in-wall cable pulls. The jump is worth it when the display must sit 50 metres or more from the source, when the route crosses doorways or finished ceilings, or when a second remote screen is required in another room. It also adds IR pass-through so the source device can be controlled from either receiving location.

Capacity and headroom

The transmitter supports one local HDMI loop-out plus two wireless receivers, each delivering 1080P at 60 Hz with HDCP 1.2 content protection. Bandwidth headroom is sufficient for Blu-ray players, cable boxes, DVRs and similar 1080P sources, but the link does not support 4K resolutions, HDR metadata or frame rates above 60 Hz. Obstructions such as thick masonry or heavy RF interference will reduce the practical range below the 150 metre specification.

Highlights

  • Place your 1080P TV anywhere without HDMI cable limits
  • Stream wireless 1080P audio and video up to 656 feet to another room
  • Connect two 1080P HD TVs to share the same video source simultaneously
  • Transmit from Blu-ray player, DVR or cable box with 1920 x 1080 resolution
  • Plug and play setup with automatic display configuration and IR remote extension

Specifications

Distance150 m / 500 ft.
Resolution Support1080P
Colorgrey

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What HDMI cable length does the local loop-out port on the sender support?

Connect the first TV to the transmitter's HDMI Output port with an HDMI cable; the kit itself transmits wirelessly up to 150 m.

Which step must be done first when setting up the two receivers to share the same source?

Connect the first TV to the transmitter's HDMI Output port with an HDMI cable, then the second TV receives content wirelessly from the same source.

How is the infrared remote-control extension powered or connected for later maintenance?

The kit supports external remote infrared extension; no separate power or pairing steps are described in the specifications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.