Lemonra
Lemonra 5 Port Non-RAID SATA III 6GB/s JMB585 adapter card
Adds five SATA 6Gb/s ports via a 2-lane M.2 PCIe 3.0 slot using the JMB585 chipset for up to 1700MB/s throughput
- ColorBlack
- Specificationsup to 1700 MB/s Speed
- Features2-Lane M.2 PCI-Express 3.0 interface (B & M Key). complies w
- Windows VistaSystem Requirements: Windows 7 (X86/X64) Windows 8/8.x / 10
- Add five SATA drives through one M.2 slot
- JMB585 chipset delivers up to 1700 MB/s throughput
- PCIe 3.0 x2 interface removes multi-drive bottlenecks
- FIS-based switching keeps all ports running at full speed
- Supports Windows 7 through 10 and Linux systems
Five-port SATA III adapter for M.2 PCIe 3.0 x2 slots
This Lemonra card plugs into an M.2 B+M key slot and provides five SATA 6 Gb/s ports for connecting SSDs or HDDs. It uses the JMB585 chipset to deliver up to 1700 MB/s aggregate bandwidth over a PCIe 3.0 x2 link. The board is black and requires no RAID configuration.
Suits builders adding multiple drives to an M.2
Ideal for expanding storage in desktops that have a free M.2 socket but lack enough native SATA ports. It supports Windows 7 through 10 and Linux using in-box drivers. Not for users who need hardware RAID, hot-plug capability, or more than five SATA connections.
Single-lane PCIe 3.0 x2 bandwidth limits total
The JMB585 controller shares two PCIe 3.0 lanes across all five ports, so simultaneous heavy I/O on multiple drives will hit this ceiling. If your workload demands sustained full-speed transfers on every port concurrently, a card with more PCIe lanes is required.
Highlights
- Add five SATA drives through one M.2 slot
- JMB585 chipset delivers up to 1700 MB/s throughput
- PCIe 3.0 x2 interface removes multi-drive bottlenecks
- FIS-based switching keeps all ports running at full speed
- Supports Windows 7 through 10 and Linux systems
Specifications
| Brand | Lemonra |
|---|---|
| Model | 5 Port Non-RAID SATA III 6GB/s |
| Color | Black |
| Specifications | up to 1700 MB/s Speed |
| Features | 2-Lane M.2 PCI-Express 3.0 interface (B & M Key). complies with PCI Express base Specification Revision 3.1a. |
| Windows Vista | System Requirements: Windows 7 (X86/X64) Windows 8/8.x / 10 (X86/X64) (Windows in-box driver) Linux-base OS |
Questions about this item
What M.2 slot keying does this adapter card require on the motherboard?
It fits a motherboard M.2 slot that accepts both B-key and M-key modules, using a 2-lane PCIe 3.0 connection.
Which step do builders often miss when installing the card into the M.2 slot?
Securing the board with the motherboard standoff screw after insertion; without it the PCIe 3.0 x2 link can become unstable.
When should the five SATA data cables be inspected or replaced?
Replace any cable that shows connector wear, cracked insulation or intermittent drive detection, since the JMB585 chipset runs each port at SATA 6 Gb/s.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



