We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black push-fit reducer fitting with 3/8 and 1/2 inch tube ends

Legris

Legris 3166 60 62 Plug-In Reducer 3/8x1/2 in OD PK10 trap

SKU CH-AWBM-GG5CS MPN 3166

Push-fit reducer joins 3/8 in and 1/2 in tubing, rated to 290 psi and 176 °F, supplied in a pack of ten

  • TypeDrain Components
  • ColorBlack
  • Push-fit connection enables quick assembly without tools
  • Reduces 1/2 in tube to 3/8 in for flexible system design
  • Fiberglass-reinforced nylon body resists corrosion and impact
  • Rated to 290 psi and 176 °F for demanding air applications
  • Pack of 10 fittings supports multiple installation points

Push-In Reducer for 3/8 and 1/2 Inch Tubes

This Legris push-fit adapter connects a 3/8 inch tube to a 1/2 inch tube stem in pneumatic circuits. The fiberglass-reinforced nylon body withstands 290 psi at up to 176 degrees Fahrenheit. It suits maintenance engineers and installers who need a quick, tool-free reduction between two different tube sizes.

Pack of Ten Reducers

The PK10 pack supplies ten identical reducers for batch installations or spares. No thread sealant is pre-applied, so the installer applies their preferred sealant if the application requires it. Having multiple units on hand reduces downtime when several connections must be changed at once.

Pressure and Temperature Limits

The fitting is rated for a maximum operating pressure of 290 psi and a maximum operating temperature of 176 degrees F. It is not intended for hydraulic systems or media exceeding these limits. Installers must verify that the system pressure and temperature stay within the rated range before use.

Highlights

  • Push-fit connection enables quick assembly without tools
  • Reduces 1/2 in tube to 3/8 in for flexible system design
  • Fiberglass-reinforced nylon body resists corrosion and impact
  • Rated to 290 psi and 176 °F for demanding air applications
  • Pack of 10 fittings supports multiple installation points

Specifications

TypeDrain Components
ColorBlack
BrandLegris
Model3166 60 62

Questions about this item

How often will the fiberglass-reinforced nylon body need replacement in an air system running at 290 psi?

The fitting is rated for continuous service at 290 psi and 176 °F; inspect annually for cracking or deformation and replace only if damage is found.

What is the first limit reached when the line runs continuously at 176 °F?

The 176 °F maximum operating temperature is the limiting factor; sustained exposure above this point will degrade the nylon before pressure becomes an issue.

Does the push-to-connect seal leak or whistle after hours of 290 psi air flow?

The push-to-connect design holds 290 psi without leakage; no whistling occurs if the tube is fully seated and the 3/8 in and 1/2 in OD tolerances are met.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.