We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three cylindrical openings in T formation

Legend Valve

Legend Valve 450-263 Copper Reducing Tee 1-1/2 x 1-1/2 x 2 bathware

SKU CH-0Y32-5ZHCV

Copper reducing tee connects three pipes at 1-1/2 by 1-1/2 by 2 inches with sweat fittings

  • ColorTransparent
  • Size1-1/2" x 1-1/2" x 2"
  • TypePipes, Valves & Fittings
  • Reduces pipe diameter for flexible plumbing layouts
  • Copper construction resists corrosion in water systems
  • C x C x C connections suit sweat-solder installs
  • Compact tee fits tight bathware installations
  • Prop 65 notice informs safe handling practices

Copper reducing tee for plumbing systems

This copper reducing tee connects three pipe sections with a 1-1/2" x 1-1/2" x 2" inside diameter and a 1-5/8" x 1-5/8" x 2-1/8" outside diameter. It is designed for sweat solder connections in residential and commercial water supply lines. The fitting is new and manufactured by Legend Valve for standard plumbing installations.

Verify pipe sizing and solder compatibility before

Confirm that your existing copper tubing matches the listed inside and outside diameters for a proper sweat joint. Ensure your system uses compatible solder and flux for potable water applications if required. Check local plumbing codes for any restrictions on copper fittings in your specific installation.

Thermal performance and pressure handling

Copper construction provides reliable thermal conductivity for hot and cold water distribution without degradation. The fitting withstands typical residential water pressures and temperature ranges encountered in standard plumbing systems. No moving parts or mechanical components are present, so operational noise is negligible under normal flow conditions.

Highlights

  • Reduces pipe diameter for flexible plumbing layouts
  • Copper construction resists corrosion in water systems
  • C x C x C connections suit sweat-solder installs
  • Compact tee fits tight bathware installations
  • Prop 65 notice informs safe handling practices

Specifications

BrandLEGEND VALVE
ColorTransparent
Size1-1/2" x 1-1/2" x 2"
TypePipes, Valves & Fittings

Questions about this item

What fittings come with the Legend Valve 450-263 copper reducing tee and what must I supply?

The box contains the single copper reducing tee with 1-1/2" x 1-1/2" x 2" ID and 1-5/8" x 1-5/8" x 2-1/8" OD dimensions; you must supply the copper pipe, flux, solder and any tools needed for sweat connections.

Which size of the Legend Valve 450-263 should I choose for a branch line that steps up from 1-1/2 inch to 2 inch?

Choose the 1-1/2" x 1-1/2" x 2" version because its two run ends match 1-1/2 inch pipe and the outlet steps up to 2 inch pipe.

What does the 1-1/2" x 1-1/2" x 2" ID marking mean once the tee is soldered into a copper system?

It means each socket accepts the corresponding outside-diameter copper tube so the two straight ports fit 1-1/2 inch tube and the branch port fits 2 inch tube.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.