We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee fitting with three openings

Legend Valve

Legend Valve 450-217 Copper Reducing Tee 1 x 1 x 1-1/4 bathware

SKU CH-CQ0F-S98Q6

Connects three copper pipes at 1 x 1 x 1-1/4 inches with sweat fittings

  • ColorTransparent
  • Size1" x 1" x 1-1/4"
  • TypePipes, Valves & Fittings
  • Copper construction resists corrosion for long-lasting plumbing performance
  • Reducing tee design connects three different pipe sizes efficiently
  • Sweat-fit connections create secure, leak-free joints when soldered
  • Compact 1 x 1 x 1-1/4 inch configuration fits tight installation spaces
  • Lead-free compliant copper meets modern drinking water safety standards

Legend Valve 450-217 Reducing Tee

This Legend Valve copper fitting joins three pipe runs in a single junction. It suits installers who need a 1" x 1" x 1-1/4" reducing tee for residential or light-commercial plumbing work. The sweat-to-sweat connections accept standard copper tubing for permanent installations. It is not intended for systems that require threaded or press-fit ends.

Thermal noise and power draw

As a passive copper fitting, the tee generates no heat, produces no noise and draws no power during operation. Its thermal behaviour follows the surrounding pipework and the fluid temperature inside the system. No electrical supply or active cooling is involved in normal use.

Included accessories and software

The product ships as a single fitting with no additional components, tools or software. Installation requires separate flux, solder and a torch compatible with copper sweat joints. No proprietary joining system or calibration utility is supplied or required.

Highlights

  • Copper construction resists corrosion for long-lasting plumbing performance
  • Reducing tee design connects three different pipe sizes efficiently
  • Sweat-fit connections create secure, leak-free joints when soldered
  • Compact 1 x 1 x 1-1/4 inch configuration fits tight installation spaces
  • Lead-free compliant copper meets modern drinking water safety standards

Specifications

BrandLEGEND VALVE
ColorTransparent
Size1" x 1" x 1-1/4"
TypePipes, Valves & Fittings

Questions about this item

How do I solder the 1" x 1" x 1-1/4" copper tee without leaks?

Clean each tube end and the three sockets with emery cloth, apply flux, fully insert the tubes so they bottom out, then heat each joint evenly until solder flows around the full circumference.

What upkeep does the copper reducing tee require after installation?

No routine maintenance is needed; inspect joints periodically for corrosion or drips and replace the tee only if a leak develops or the fitting is damaged.

What is the first limitation I will hit if I run hot water through this tee continuously?

The copper material handles typical domestic hot-water temperatures, so the practical limit is the pressure rating of the connected piping system rather than the tee itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.