We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 2 ft Lemo 5-pin male-to-male timecode cable with black jacket and metal connectors

Laird Technologies

Laird Technologies 2' Lemo 5-Pin Male to Male Timecode S-Video Cable

SKU CH-Z1NM-MPA5F

Two-foot Lemo 5-pin male-to-male timecode cable for Red One, Epic and Scarlet cameras, 100 % bench-tested and weighing .18 lb

  • Secure timecode link with Lemo 5-pin connectors on both ends
  • Designed for Red One, Epic and Scarlet digital cinema cameras
  • Built from Lemo, Hitachi, Belden and Neutrik components for reliability
  • Every unit passes 100% bench testing before shipment
  • Lightweight at .18 lbs and two feet long for on-location portability

Red One timecode cable

Laird Technologies supplies a 2-foot S-Video cable terminated with Lemo 5-pin male connectors at each end. It carries timecode in and out signals for Red One, Epic and Scarlet digital cinema cameras. The short length keeps cable runs tidy on professional rigs.

Lemo 5-pin male connectors

Both ends use locking Lemo 5-pin male plugs that mate with the camera's timecode ports and external timecode devices. This connector type is the single specification that determines whether the cable fits the equipment. No other connector style will work with the specified Red camera timecode interface.

Bench-tested assembly

Every unit passes a 100 percent bench test before shipment, verifying continuity and signal integrity. The cable weighs .18 lbs and uses components sourced from Lemo, Hitachi, Belden and Neutrik. No additional adapters or software are included in the package.

Highlights

  • Secure timecode link with Lemo 5-pin connectors on both ends
  • Designed for Red One, Epic and Scarlet digital cinema cameras
  • Built from Lemo, Hitachi, Belden and Neutrik components for reliability
  • Every unit passes 100% bench testing before shipment
  • Lightweight at .18 lbs and two feet long for on-location portability

Specifications

No published specifications for this item yet.

Questions about this item

How does the 2-foot length affect timecode runs on set?

The short 2-foot span keeps the timecode link tidy between a Red One, Epic or Scarlet body and an adjacent 3D rig or external recorder, reducing cable slack without restricting camera movement.

What does the Lemo 5-pin interface carry in this cable?

The Lemo 5-pin male connectors on both ends pass timecode in and out signals, matching the Red One/Epic/Scarlet pinout for frame-accurate sync with professional rigs.

What clearance is needed to plug the connectors into a Red camera?

Each Lemo 5-pin male plug is a compact push-pull design that seats directly into the camera’s timecode port; the .18 lb cable adds negligible strain so no extra mounting hardware is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.