We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dual 120mm black and white PWM fans on aluminium heatsink with copper heatpipes for GTX 690

Laintek

Laintek Accelero Twin Turbo 690 VGA Cooler for GTX 690

SKU CH-M1F4-09S2H

Dual 120mm PWM fans with 10 copper heatpipes and 86 aluminium fins cool the GTX 690 GPU, memory and VRM up to 26% better than stock while running 13 times quieter at 0.4 sone

  • FeaturesType: Fan with Heatsink; To Fit: GPU Processor
  • Cools 26% better than stock with 10 copper heatpipes
  • Runs 13-times quieter at just .4 sone
  • Dual 120mm PWM fans spin 400-1500 RPM
  • Lowers RAM, VR and bridge temps up to 24%
  • Includes MX-4 thermal compound for quick install

Tailored GTX 690 Cooler

The Laintek Accelero Twin Turbo 690 is a dedicated VGA cooler engineered specifically for the NVIDIA GeForce GTX 690 graphics card. It replaces the original thermal solution with a larger heatsink and dual-fan assembly. This upgrade targets owners of that specific GPU who want lower operating temperatures and significantly reduced acoustic output without changing their graphics hardware.

Thermals Noise And Power

Two 120 mm fans with fluid-dynamic bearings spin between 400 and 1,500 RPM under PWM control, producing a measured 0.4 sone at 24 dBA. The heatsink uses ten copper heatpipes and 86 aluminum fins to draw heat away from the GPU, memory, voltage-regulator and bridge areas. Supplier data claims 26 % better cooling performance and 13-times quieter operation than the stock cooler, with RAM and VR temperatures reduced by up to 24 %. A 4-pin power connector feeds both fans.

MX-4 Compound Included

The package supplies a tube of MX-4 thermal compound so the installer can achieve proper contact between the dies and the new cold plate immediately. No additional software, mounting brackets for other cards or lighting controllers are bundled. The cooler is a physical retrofit only; it does not alter the GTX 690’s clock speeds, power limits or feature set.

Highlights

  • Cools 26% better than stock with 10 copper heatpipes
  • Runs 13-times quieter at just .4 sone
  • Dual 120mm PWM fans spin 400-1500 RPM
  • Lowers RAM, VR and bridge temps up to 24%
  • Includes MX-4 thermal compound for quick install

Specifications

FeaturesType: Fan with Heatsink; To Fit: GPU Processor

Questions about this item

How do I install the Accelero Twin Turbo 690 on my GTX 690, and what step do people often miss?

Remove the stock cooler, clean the GPU dies, apply the included MX-4 thermal compound, then mount the heatsink with 10 copper heatpipes and secure the dual 120mm PWM fans to the 4-pin headers.

What maintenance or replacement will this cooler need over time?

The fluid-dynamic bearing fans are rated for long life; periodic dust removal from the 86 aluminum fins keeps airflow at 400 to 1,500 RPM and noise at .4 sone.

What thermal limit appears first when the GTX 690 runs sustained loads with this cooler?

The heatsink dissipates heat 26% better than stock, lowering GPU, RAM, VR and bridge temperatures by up to 24% before fan speed hits the 1,500 RPM PWM ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.