We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five ten-foot braided Lightning cables in red, blue, green, purple and orange

KREMORV 5-Pack 10 ft Lightning Cables Multi-Colour

SKU CH-WX22-BH9JK

Five 10 ft MFi-certified Lightning cables in assorted colours support 2.4 A fast charging and 480 Mbps sync

  • Compatible Phone ModeliPhone Charger,iPad
  • ColorMulti-Color
  • AdapterLightning Port
  • HDMI PortLightning
  • Output Amp2.4A
  • Wire GaugeFast Charging,High Charging
  • Charges at up to 2.4 amps for faster power delivery
  • Syncs data at 480 Mbps via USB 2.0 for quick transfers
  • Apple MFi certified for guaranteed compatibility with iPhone and iPad
  • 10 ft length lets you charge from a distance in any room
  • Nylon braided jacket withstands 20000+ bends to resist tangling and wear

Five-Pack Lightning Cables

The pack contains five USB-A to Lightning cables, each measuring ten feet, finished in red, blue, green, purple and orange. They are Apple MFi certified and built with nylon-braided jackets and aluminium-alloy connectors rated for over twenty thousand bends. The set targets iPhone and iPad owners who need long, colour-coded cords for multiple rooms or users.

2.4 A Charging Current

The single specification that decides fit is the maximum 2.4 A output current supported by the copper conductors. Any device or charger limited to a lower current will not gain extra speed, while higher-current USB-C Power Delivery gear cannot use these cables at all.

480 Mbps Sync and Ten-Foot Reach

Data transfers run at up to 480 Mbps over USB 2.0, fast enough for backups and photo offloads but not for large video libraries. The ten-foot length reaches bedside tables, car seats or sofa outlets comfortably, yet the USB-A plug and 2.4 A ceiling mean modern fast-charge iPhones will not hit their peak charging rates.

Highlights

  • Charges at up to 2.4 amps for faster power delivery
  • Syncs data at 480 Mbps via USB 2.0 for quick transfers
  • Apple MFi certified for guaranteed compatibility with iPhone and iPad
  • 10 ft length lets you charge from a distance in any room
  • Nylon braided jacket withstands 20000+ bends to resist tangling and wear

Specifications

BrandKREMORV
SeriesKM-ICB-01
ModeliPhone Charger,iPad
Compatible Phone ModeliPhone Charger,iPad
ColorMulti-Color
AdapterLightning Port
HDMI PortLightning
Output Amp2.4A
Wire GaugeFast Charging,High Charging
SpecificationsFast Charging,High Charging, 10 feet, Lightning, 2.4 amps, 8, Multicolor, Male-to-Male, iPhone Charger,iPad, KM-ICB-01
FeaturesFast Charging,High Charging

Questions about this item

How does the 2.4 A rating translate to real-world charging speed on an iPhone?

The cable supports up to 2.4 A, so an iPhone will draw the maximum current its own charging circuit allows, typically reaching full speed with a compatible 12 W or higher USB-A charger.

What data-transfer ceiling does the USB 2.0 interface impose on these cables?

The USB 2.0 link caps sync at 480 Mbps, so large photo or video libraries move at that rate regardless of the Lightning connector.

What physical clearance is needed for the aluminium alloy Lightning connector?

The connector has a low-profile aluminium alloy shell that fits most cases, but very thick rugged cases may require a case opening at least as wide as the standard Lightning port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.