We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red braided PSU extension cable kit with 24-pin ATX, two 8-pin CPU and two 8-pin GPU connectors, plus cable combs

KOZYFOX

KOZYFOX 18AWG Braided PSU Extension Kit Red 30cm 24P 2x8P CPU 2x8P GPU

SKU CH-M6N2-QGVAR

Red 18AWG braided PSU extension kit with 24-pin ATX, dual 4+4-pin CPU and dual 6+2-pin GPU cables at 30 cm, plus cable combs for tidy routing

  • TypeComponent Cables
  • ColorRed
  • Length11.81 in. (30cm)
  • Cable Length11.81 in. (30cm)
  • Connector Detail1 x 24-P ATX motherboard cable extension (11.8 inch/30cm), 2
  • Red braided extensions create a striking visual theme
  • 18AWG conductors deliver reliable power to every component
  • 30cm length keeps cable runs tidy in compact builds
  • Dual 6+2-pin GPU cables support single or dual graphics cards
  • Included combs align 24-pin and 8-pin wires for a clean finish

Build Aesthetic

Red 18AWG braided extensions add a vivid accent to custom PC builds while keeping cable routing tidy. The set includes one 24-pin ATX extension, two 4+4-pin EPS CPU extensions and two 6+2-pin PCIe GPU extensions, each 30cm long. Cable combs are supplied for clean alignment. The kit suits modders who want colour coordination without replacing the power supply.

Extension Limits

Extensions add 30cm to the existing PSU cables, so total reach depends on the original loom length. The 18AWG conductors handle typical desktop loads but are not rated for extreme overclocking currents beyond standard specifications. Daisy-chaining extensions is not recommended because each joint adds resistance. Builders needing longer runs should consider full replacement cables instead.

Compatibility Check

Verify that your power supply uses standard ATX 24-pin, EPS 4+4-pin and PCIe 6+2-pin connectors. Confirm the case has enough clearance for the added 30cm length and the stiff braided sleeve. Ensure the motherboard and graphics card power sockets match the 20+4, 4+4 and 6+2 pin layouts. The red colour is fixed; other hues are sold separately.

Highlights

  • Red braided extensions create a striking visual theme
  • 18AWG conductors deliver reliable power to every component
  • 30cm length keeps cable runs tidy in compact builds
  • Dual 6+2-pin GPU cables support single or dual graphics cards
  • Included combs align 24-pin and 8-pin wires for a clean finish

Specifications

TypeComponent Cables
ColorRed
Length11.81 in. (30cm)
Cable Length11.81 in. (30cm)
Connector Detail1 x 24-P ATX motherboard cable extension (11.8 inch/30cm), 2 x 4+4 P EPS CPU cable extension (11.8 inch/30cm), 2 x 6+2 P PCI-e GPU cable extension (11.8 inch/30cm)

Questions about this item

Should I choose the 30 cm or 50 cm length for a standard mid-tower build?

The 30 cm extensions suit most mid-tower cases, keeping cables tidy without excess slack. Choose 50 cm only if your PSU sits far from the motherboard tray or you plan wide routing loops.

What does the 18 AWG rating mean for power delivery to my GPU and CPU?

18 AWG conductors handle the current drawn by modern graphics cards and processors without voltage drop over the 30 cm run, so the extensions add no measurable resistance.

Are the 6+2 pin PCIe and 4+4 pin EPS connectors compatible with ATX 3.0 power supplies?

The 6+2 pin PCIe and 4+4 pin EPS plugs follow the standard ATX pinout, so they mate with any ATX 3.0 or earlier PSU cables that provide the matching native connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.