We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium D-Tap splitter hub with four female ports and LED display

Kondor Blue

Kondor Blue D-Tap Splitter Hub 16" 12.0V 14.8V 75g

SKU CH-3GND-WEJXC

A 16" D-Tap splitter hub with one 12.0V and three 14.8V outputs, aluminium body and LED status indicator at 75g

  • 16-inch cable keeps power sources within easy reach on set
  • One 12.0 V regulated port protects sensitive gear from voltage spikes
  • Three 14.8 V ports feed cameras, lights and monitors simultaneously
  • CNC aluminium hub with ARRI anti-twist holes secures the splitter to rigs
  • Mini voltmeter and status LED confirm live power at a glance

Power distribution hub

This Kondor Blue D-Tap splitter hub converts a single male D-Tap input into four female D-Tap outputs. The unit supplies one regulated 12.0V port and three 14.8V ports for powering multiple devices from a single battery source. A built-in mini voltmeter readout and status LED provide immediate visibility of power levels and connectivity. The 16-inch cable length allows flexible placement on rigs or carts.

Mounting and portability

The all-metal CNC aluminium enclosure includes multiple mounting points on two sides and the bottom, each featuring ARRI anti-twist holes for secure accessory attachment. Rubber O-rings are supplied to shim and secure mounted gear. At 75 g the hub adds minimal weight to a camera build. Users needing more than four D-Tap outputs or a different voltage mix should consider alternative distribution units.

Voltage regulation

The single 12.0V regulated port delivers stable voltage for sensitive electronics that cannot tolerate raw battery output. The three 14.8V ports pass the source voltage directly for compatible lights, monitors and accessories. Matching each device to the correct port type is the decisive factor for safe operation.

Highlights

  • 16-inch cable keeps power sources within easy reach on set
  • One 12.0 V regulated port protects sensitive gear from voltage spikes
  • Three 14.8 V ports feed cameras, lights and monitors simultaneously
  • CNC aluminium hub with ARRI anti-twist holes secures the splitter to rigs
  • Mini voltmeter and status LED confirm live power at a glance

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 16" D-Tap splitter hub to a rig, and which step is often missed?

Use the ARRI anti-twist holes on two sides and the bottom with compatible pins or clamps; the step people miss is adding the two supplied rubber O-rings to shim and lock accessories firmly.

What maintenance or replacement will the Kondor Blue hub need over time?

Inspect the nylon cable and four female D-Tap ports for wear or bent pins; replace the unit if the mini voltmeter readout or status LED stops showing voltage on the 12.0V or 14.8V outputs.

What limit appears first when the hub runs continuously at full load?

The 12.0V regulated port and three 14.8V ports share the single male D-Tap input, so total current draw is capped by the source battery and cable gauge; the mini voltmeter will show voltage sag before any port trips.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.