We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short braided cable with DIN 1.0/2.3 and right-angle 3.5mm connectors

Kondor Blue

Kondor Blue 10" DIN 1.0/2.3 to 3.5mm Timecode Cable

SKU CH-TVDF-9QPMZ

Connects Canon R5 C or Tentacle Sync Box to 3.5 mm timecode devices using a DIN 1.0/2.3 plug and right-angle 3.5 mm jack in a 10" nylon-braided cable

  • Syncs timecode on Canon R5 C and Tentacle Sync Box
  • Weighs .5 oz for ultra-light rigging
  • 10 inch length keeps setups tidy
  • Right-angle 3.5 mm plug prevents accidental pulls
  • Nylon braid and metal shells resist wear

Professional Timecode Cable

The Kondor Blue 10" DIN 1.0/2.3 to 3.5mm Timecode Cable links a Canon R5 C camera to a Tentacle Sync E or Deity TC-1 timecode box. It carries professional timecode signals for multi-camera and dual-system audio workflows. The right-angle 3.5mm plug reduces strain on the camera port. The 10" length keeps rigs tidy on gimbals or shoulder builds.

Verify Connector Requirements

Confirm the camera provides a DIN 1.0/2.3 timecode output and the recorder accepts a 3.5mm timecode input. Check that 25.4cm of cable reaches between your mounted devices without tension. The 3mm outer diameter fits tight cable channels but cannot be field-repaired. Buyers who need longer runs or different connector types cannot use this cable.

Sustained Production Use

Nylon braiding protects the conductors during daily coiling and uncoiling on set. Metal connector shells resist bending when cables are routed through follow-focus gears or matte boxes. The 14g weight adds negligible mass to handheld rigs during extended takes. Signal integrity holds over repeated connect-disconnect cycles in fast-paced environments.

Highlights

  • Syncs timecode on Canon R5 C and Tentacle Sync Box
  • Weighs .5 oz for ultra-light rigging
  • 10 inch length keeps setups tidy
  • Right-angle 3.5 mm plug prevents accidental pulls
  • Nylon braid and metal shells resist wear

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come on the cable and do I need any adapters?

The cable has a DIN 1.0/2.3 male connector on one end and a right-angle 3.5 mm male connector on the other; no adapters are required for the listed devices.

The cable is 10 inches long; is that the only length available?

This model is supplied at 10 inches (25.4 cm) and weighs 0.5 oz (14 g).

How does the 3 mm outer diameter hold up on a rig?

The 3 mm braided jacket and metal connectors resist wear and prevent accidental disconnection during handheld or gimbal work.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.