We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small rectangular PoE splitters with USB-C and Ethernet ports, matte black finish

kolitt

kolitt 4-Pack 5V Gigabit PoE Splitter USB-C 48V to 5V 2.4A IEEE 802.3af

SKU CH-7SBY-D8YXP

Converts 48 V PoE to 5 V 2.4 A USB-C power plus gigabit Ethernet for non-PoE devices, four splitters included

  • TypeRack Enclosure
  • Powers USB-C devices from a PoE switch using IEEE 802.3af input
  • Delivers 5 V at 2.4 A through a USB Type-C connector for compatible gear
  • Passes 10/100/1000 Mbps Ethernet data alongside power over a single cable
  • Works instantly with no configuration required for quick deployment
  • Includes four splitters in one pack for multiple device installations

Power over Ethernet for USB-C devices

This four-pack of IEEE 802.3af splitters converts 44-56 V PoE input into 5 V 2.4 A USB-C power while passing 10/100/1000 Mbps data to non-PoE equipment such as access points, cameras or IoT gateways. Each unit delivers up to 12 watts without an external power supply.

Upgrading from injector-only setups

The splitters replace separate PoE injectors and USB wall adapters when a PoE switch or midspan already provides 48 V power on the cable. The jump is worthwhile where mains sockets are absent or impractical but a single Ethernet run reaches the device location.

Plug-and-play with cable-length limits

Installation requires only connecting the PoE source to the input port and the USB-C device to the output; no software configuration is needed. The main constraint is the 100 metre Ethernet distance limit, and devices drawing more than 2.4 A at 5 V will exceed the splitter’s capacity.

Highlights

  • Powers USB-C devices from a PoE switch using IEEE 802.3af input
  • Delivers 5 V at 2.4 A through a USB Type-C connector for compatible gear
  • Passes 10/100/1000 Mbps Ethernet data alongside power over a single cable
  • Works instantly with no configuration required for quick deployment
  • Includes four splitters in one pack for multiple device installations

Specifications

TypeRack Enclosure

Questions about this item

Does the splitter need a separate power brick or rack shelf to sit on?

It draws 44 to 56 V DC from a PoE switch or injector over the Ethernet cable, so no external power brick or shelf is required.

Which cable do I plug in first to avoid a handshake failure?

Connect the Ethernet cable from the PoE source to the splitter input, then attach the USB-C power lead and the data Ethernet cable to the device.

Will the USB-C port wear out from repeated unplugging of my access point?

The USB-C connector is rated for typical insertion cycles; if it becomes loose, replace the individual splitter unit from the four-pack.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.