Kisumi USB to DC 3.5mm × 1.35mm charger cord White 1 Pack
USB-to-DC cable with a 3.5 mm × 1.35 mm plug powers compatible Bitvae, Fairywill, Vekkia, Mornwell, SEAGO and other toothbrushes or flossers from any USB source
- Compatible Phone ManufacturerNo Compatible Phone Models
- Compatible Phone ModelNo Compatible Phone Models, Toothbrushes
- ColorWhite
- Adapter2-pin
- HDMI Port2-pin
- Max Power Output10W
- Wide compatibility with Bitvae toothbrushes and flossers
- Works with many Fairywill sonic models including D1 and E10
- Fits Vekkia, Mornwell, SEAGO and other brands
- USB to DC 3.5mm × 1.35mm plug for power banks
- 5 V output rated at 10 W maximum power
Kisumi USB to DC charger cord for Bitvae
This white charger cord replaces the original cable for Bitvae D2, R1, R2, S2 electric toothbrushes and C2, C5, C6 water flossers. It also fits Fairywill sonic toothbrush models including D1, D3, D7, D8, E6, E10, E11, P11, P80, FW-507, FW-508, FW-917, SG-508, TB-507, TB-508 and the 2001 Kids model. The USB to DC 3.5mm × 1.35mm connector works with standard USB power sources.
Check your device model
The cable is not compatible with all water flossers or electric toothbrushes. It will not work with unlisted brands or models such as Vekkia, Mornwell, SEAGO, Dnsly, Kipozi, Gloridea, Initio or ATMOKO unless the specific model matches the listed compatibility. Verify that your device uses a DC 3.5mm × 1.35mm input port. The cord delivers a maximum output of 10W at 5V from any USB power adapter or power bank.
Steady 5V 10W output during daily charging cycles
The cord maintains a consistent 5V supply at up to 10W while the toothbrush or flosser battery recharges. There is no burst or fast-charge mode described; the power delivery stays level throughout the charging session. The 2-pin male-to-male design connects directly between the USB source and the device without intermediate electronics.
Highlights
- Wide compatibility with Bitvae toothbrushes and flossers
- Works with many Fairywill sonic models including D1 and E10
- Fits Vekkia, Mornwell, SEAGO and other brands
- USB to DC 3.5mm × 1.35mm plug for power banks
- 5 V output rated at 10 W maximum power
Specifications
| Brand | Kisumi |
|---|---|
| Model | No Compatible Phone Models, Toothbrushes |
| Compatible Phone Manufacturer | No Compatible Phone Models |
| Compatible Phone Model | No Compatible Phone Models, Toothbrushes |
| Color | White |
| Adapter | 2-pin |
| HDMI Port | 2-pin |
| Max Power Output | 10W |
| Output Volt | 5V |
| Support Volt | 5 volts_of_direct_current |
| Wire Gauge | rechargeable |
| Specifications | rechargeable, 1 Pack, USB, 2-pin, 2, White, Male-to-Male, Toothbrushes, Kisumi-EC-2P |
| Features | rechargeable |
Questions about this item
What comes in the box and do I need a separate power adapter?
The pack contains one white USB to DC 3.5mm × 1.35mm cable; plug it into any USB power source you already own.
Which version should I choose for a Fairywill D1 or FW-507 toothbrush?
This single cable fits Fairywill D1, D3, D7, D8, E6, E10, E11, P11, P80, FW-507, FW-508, FW-917, SG-508, TB-507, TB-508 and the 2001 Kids model.
What does the 10W rating mean when I charge my Bitvae R2?
The cable delivers up to 10W at 5V from any USB port, matching the toothbrush’s original charger speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



