Kiprim WS01 Stud Finder Wall Scanner
5-in-1 wall scanner detects wood studs, metal pipes and live AC wires with three depth modes and audible alerts
- Includestrue
- Standards/CertificationsFDA Class VI Seats
- Detect wood, metal and live wires before drilling
- 5-in-1 sensor covers studs, pipes and AC cables
- 2-inch backlit LCD shows mode, signal and battery
- Audible beep and flashing icon mark exact center
- Self-calibration removes background noise for reliable readings
5-in-1 Stud Finder for DIY and Pros
The Kiprim WS01 locates wood studs, metal pipes and live AC wires behind walls, helping DIY renovators and professional tradespeople avoid costly damage when drilling or nailing. Its self-calibration function reduces background interference across various wall types for reliable results every time. Compact and lightweight at 123g, it fits easily in a tool bag for on-site convenience.
LCD Display with Audible Alerts
A clear 2-inch backlit LCD shows the active detection mode, signal strength, centre indicator and battery status for precise, easy reading. Continuous beeping and a flashing icon mark the exact centre of a stud or wire, speeding up layout work in dim conditions. The 9V battery is included so the tool is ready to use straight from the box.
Check Wall Suitability Before Use
This scanner is designed for standard drywall, plaster and wood surfaces; buyers needing to penetrate concrete, thick tile or dense masonry should verify the three depth modes meet their requirements. It does not detect non-metallic pipes such as PVC or PEX, so plumbers tracing plastic lines will need a different method. Ensure a fresh 9V cell is available for extended jobs.
Highlights
- Detect wood, metal and live wires before drilling
- 5-in-1 sensor covers studs, pipes and AC cables
- 2-inch backlit LCD shows mode, signal and battery
- Audible beep and flashing icon mark exact center
- Self-calibration removes background noise for reliable readings
Specifications
| Includes | true |
|---|---|
| Standards/Certifications | FDA Class VI Seats |
Questions about this item
How often will the 9V battery need replacing during regular use?
The 9V battery included powers the scanner; replace it when the battery-status icon on the LCD indicates low charge.
Which detection depth mode reaches its limit first on thick walls?
The ½-inch wood-stud mode saturates earliest; switch to the 1-inch or 1½-inch modes for deeper scanning.
Does the beep warning stay audible in a noisy room after hours of scanning?
The continuous beep and flashing centre icon remain active as long as the battery holds sufficient voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Pintech DP-235 High Voltage Differential Active Probe 2600V 35MHz 50X/500X
- Differential probe…
Audiovox - Generic Telescoping Magnetic Pickup Tool Set Red
- Magnetic Pickup Too…
HKNDT AR63B Digital Vibration Meter measurement tool
- Vibration Meters



