Kingston Technology Corp.
Kingston Technology Corp. ValueRAM KVR26S19D8/32 32GB DDR4 2666 CL19 laptop RAM
Adds 32 GB of DDR4 laptop memory at 2666 MHz with CL19 timing and 1.20 V operation
- TypeMemory
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- 32 GB capacity for demanding multitasking and large datasets
- DDR4 2666 MHz speed for responsive system performance
- CL19 latency with 1.20 V operation for efficient power use
- 260-pin SO-DIMM form factor fits standard laptop slots
- Non-ECC unbuffered design for broad consumer notebook compatibility
Capacity and form factor
This is a 32 GB DDR4 laptop memory module in a 260-pin SO-DIMM package. It suits users upgrading a single slot or building a high-capacity mobile workstation. Buyers needing ECC error correction or registered buffering should look elsewhere.
Speed and headroom
The module runs at 2666 MHz with a CAS latency of 19 and a PC4-21300 bandwidth rating. It handles everyday multitasking and moderate content creation comfortably. Workloads that demand higher frequencies or lower latencies will exceed its design envelope.
Thermals and power
Operating at 1.20 V, the unbuffered non-ECC design draws minimal power and generates little heat under normal loads. Passive cooling in a typical laptop chassis is sufficient. Sustained maximum bandwidth workloads may raise temperatures but remain within standard SO-DIMM thermal limits.
Highlights
- 32 GB capacity for demanding multitasking and large datasets
- DDR4 2666 MHz speed for responsive system performance
- CL19 latency with 1.20 V operation for efficient power use
- 260-pin SO-DIMM form factor fits standard laptop slots
- Non-ECC unbuffered design for broad consumer notebook compatibility
Specifications
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR26S19D8/32 |
| Type | Memory |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
Will this CL19 DDR4-2666 SO-DIMM run alongside an existing CL19 DDR4-2666 module without manual timing changes?
Matching speed and latency lets the memory controller use the same timings for both sticks, so the system should boot at 2666 MHz automatically.
How can I confirm the module is running at 2666 MHz with CL19 timings after installation?
Open Task Manager Performance tab or run CPU-Z; both will show the current DRAM frequency and CAS latency values.
Does the package include only the 32 GB SO-DIMM or are tools or adapters also supplied?
Only the 260-pin unbuffered non-ECC module is included; no screwdriver, adapter or extra hardware is provided.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00208801BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.00008341BTC
In stock