Kingston Technology Corp.
Kingston Technology Corp. KVR400X64SC3A/512 512MB DDR 400 laptop RAM
512 MB DDR 400 laptop module with CL3 timing for legacy DDR SO-DIMM slots
- Capacity512MB
- Type200-Pin DDR SO-DIMM
- SpeedDDR 400 (PC 3200)
- CAS LatencyCL3
- Timing3-3-3
- Voltage2.60V
- 512MB capacity upgrades older laptop memory
- DDR 400 speed matches PC3200 system requirements
- CL3 latency supports stable data access
- 60V operation fits standard DDR voltage
- 200-pin SO-DIMM fits compatible laptop slots
ValueRAM 512MB DDR 400 SO-DIMM
This Kingston ValueRAM module provides 512MB of DDR 400 memory in a 200-pin SO-DIMM form factor. It operates at PC 3200 speed with CL3 latency and 2.60V. The stick is unbuffered, non-ECC and has no heat spreader. It is a new component for laptop memory upgrades.
Laptops with DDR 400 SO-DIMM slots
The module suits notebooks that accept 200-pin DDR SO-DIMMs running at 400MHz and 2.60V. Systems requiring registered or ECC memory cannot use this stick. Laptops limited to lower DDR speeds or different pin counts should look elsewhere.
200-pin DDR SO-DIMM interface
The single specification that determines fit is the 200-pin DDR SO-DIMM interface running at DDR 400 (PC 3200). The laptop's memory slot must match this exact connector and signalling standard for the module to function.
Highlights
- 512MB capacity upgrades older laptop memory
- DDR 400 speed matches PC3200 system requirements
- CL3 latency supports stable data access
- 60V operation fits standard DDR voltage
- 200-pin SO-DIMM fits compatible laptop slots
Specifications
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR400X64SC3A/512 |
| Capacity | 512MB |
| Type | 200-Pin DDR SO-DIMM |
| Speed | DDR 400 (PC 3200) |
| CAS Latency | CL3 |
| Timing | 3-3-3 |
| Voltage | 2.60V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Shipping weight | 0.05 kg |
| Package size | 170 × 56 × 15 mm |
Questions about this item
Does this 200-pin DDR SO-DIMM fit a standard laptop memory slot?
Yes, the 200-pin DDR SO-DIMM form factor matches the standard slot used for DDR 400 (PC 3200) laptop memory.
What is the correct way to seat this module so the side clips engage?
Align the notch on the module with the key in the slot, insert the module evenly, then press down firmly until both side clips snap into the notches on the PCB.
Will this 512MB stick need any firmware updates or battery replacements over time?
No, the module is unbuffered non-ECC DRAM with no firmware or onboard battery, so it requires no maintenance or replacement beyond physical removal if you upgrade capacity.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



