We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 184-pin DDR SDRAM module, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR333X72C25/1G 1GB DDR 333 (PC 2700) ECC Unbuffered server RAM

SKU CH-N20T-8JK7C MPN KVR333X72C25/1G

1GB 184-pin DDR 333 (PC 2700) ECC unbuffered server memory with CL2.5 latency at 2.5V

  • Capacity1GB
  • Type184-Pin DDR SDRAM
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Voltage2.50V
  • ECCYes
  • Error-correcting code protects data integrity
  • DDR 333 PC 2700 speed suits legacy server boards
  • CAS latency 2.5 reduces access delay
  • 184-pin DDR SDRAM form factor fits compatible slots
  • Unbuffered design simplifies installation in supported systems

1GB DDR 333 ECC Unbuffered Server DIMM

This 1GB Kingston module is a 184-pin DDR SDRAM running at DDR 333 (PC 2700) with CL2.5 latency and 2.50V operation. It includes ECC error correction and ships without a heat spreader for standard server slots. The stick is supplied new and ready for installation.

Suits legacy servers needing ECC DDR 333 memory

Systems that specifically require 184-pin DDR 333 ECC unbuffered DIMMs can use this part for maintenance or capacity expansion. Builders whose platforms demand registered DIMMs, different pin counts, non-ECC memory, or other voltage levels should look at something else.

184-pin DDR SDRAM interface decides compatibility

The module fits only motherboards with 184-pin DDR slots keyed for 2.50V unbuffered ECC DDR 333 (PC 2700) memory. Verifying the slot type and ECC requirement against the system manual is the single step that confirms whether this DIMM will work.

Highlights

  • Error-correcting code protects data integrity
  • DDR 333 PC 2700 speed suits legacy server boards
  • CAS latency 2.5 reduces access delay
  • 184-pin DDR SDRAM form factor fits compatible slots
  • Unbuffered design simplifies installation in supported systems

Specifications

BrandKingston
ModelKVR333X72C25/1G
Capacity1GB
Type184-Pin DDR SDRAM
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Voltage2.50V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Shipping weight0.05 kg
Package size159 × 46 × 8 mm

Questions about this item

Does my server motherboard need an 184-pin DDR slot for this 1GB module?

Yes, the KVR333X72C25/1G uses the 184-pin DDR SDRAM form factor and requires a matching DDR 333 (PC 2700) slot.

Will this CL2.5 ECC unbuffered stick run with older CL2 registered modules I already have?

Mixing unbuffered and registered DIMMs is not supported; the system will not POST if both types are installed together.

How can I confirm the module is detected at DDR 333 speed after installation?

Check the BIOS memory information or run a tool such as CPU-Z; it should report 1GB at 333 MHz with CL2.5 timings.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.