We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 DIMM with black chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR16N11/8 8GB DDR3 1600 desktop RAM

SKU CH-PG9Z-GCYBZ MPN KVR16N11/8

An 8 GB DDR3 desktop module running at 1600 MHz with CL11 timing and standard 1.5 V operation

  • Capacity8GB
  • Type240-Pin PC RAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.50V

Capacity 8GB

  • 8GB capacity lets you run more applications at once
  • DDR3 1600 speed moves data at 1600Mb/sec per pin
  • CL11 timing with 11-11-11 cycle reduces access delay
  • JEDEC 1.5V standard keeps power draw low and stable
  • 240-pin unbuffered DIMM fits standard desktop memory slots

8GB DDR3 1600 module for desktop upgrades

This Kingston ValueRAM stick delivers 8GB of DDR3 memory at 1600 MT/s with CL11 timings. It is an unbuffered, non-ECC DIMM built to JEDEC 1.5V specifications for standard desktop systems.

Check motherboard DDR3 slot count

Verify that your board accepts 240-pin DDR3 DIMMs and supports 1600 MT/s operation at 1.5V. Ensure enough free slots exist for the desired total capacity and that the BIOS can run JEDEC-standard timings of 11-11-11.

Runs at standard voltage with no heat spreader

The module operates at 1.5V within the 1.425V to 1.575V JEDEC range, drawing minimal power in normal use. Without a heat spreader it relies on case airflow; PCB height is 18.75mm so it fits most standard DIMM slots.

Highlights

  • 8GB capacity lets you run more applications at once
  • DDR3 1600 speed moves data at 1600Mb/sec per pin
  • CL11 timing with 11-11-11 cycle reduces access delay
  • JEDEC 1.5V standard keeps power draw low and stable
  • 240-pin unbuffered DIMM fits standard desktop memory slots

Specifications

BrandKingston
SeriesValueRAM
ModelKVR16N11/8
Capacity8GB
Type240-Pin PC RAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
Bi-directional Differential Data Strobe
Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
On Die Term
Shipping weight0.03 kg
Package size147 × 46 × 9 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 8 GB DDR3 1600 module fit a standard desktop DIMM slot?

Yes, it uses the 240-pin DDR3 form factor that matches ordinary desktop memory slots.

Does the module require a motherboard that can supply 1.5 V?

It operates at the JEDEC standard 1.5 V with a supported range of 1.425 V to 1.575 V.

Can I add this stick alongside existing CL9 memory?

The module runs at CL11 by default but supports programmable CAS latencies down to CL6, so the system will typically negotiate a common speed and timing.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.