Kingston Technology Corp.
Kingston Technology Corp. KTH-PL432/64G 64GB DDR4 3200MT/s ECC Registered server RAM
64GB DDR4 3200MT/s ECC registered DIMM with CL22 latency and 1.2V operation
- Capacity64GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- 64 GB capacity supports large server workloads
- DDR4 3200 MT/s delivers high memory bandwidth
- ECC registered design protects data integrity
- CL22 latency at 1.20 V optimises efficiency
- 288-pin dual-rank module fits standard DDR4 slots
Server-grade DDR4 capacity
This 64GB registered DIMM is built for servers and workstations that require error-correcting memory at DDR4 3200 speeds. It suits administrators upgrading compatible platforms where data integrity and maximum density per slot are priorities.
64GB dual-rank registered module
The module delivers 64GB in a single 288-pin stick using 2Rx4 organisation, so a board with fewer slots can still reach high total capacity. Bandwidth tops out at the PC4-25600 rating and latency is CL22 at 1.20V.
Passive thermals at standard voltage
Without a heat spreader the DIMM relies on chassis airflow and runs at the JEDEC 1.20V level, keeping power draw modest under typical server loads. Noise is limited to the system fans already moving air across the memory bank.
Highlights
- 64 GB capacity supports large server workloads
- DDR4 3200 MT/s delivers high memory bandwidth
- ECC registered design protects data integrity
- CL22 latency at 1.20 V optimises efficiency
- 288-pin dual-rank module fits standard DDR4 slots
Specifications
| Brand | Kingston |
|---|---|
| Model | KTH-PL432/64G |
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Shipping weight | 0.03 kg |
| Package size | 140 × 44 × 6 mm |
Questions about this item
Will this 64GB DDR4 3200 CL22 registered ECC module run alongside older DDR4 sticks in my server?
The module is rated DDR4 3200 (PC4 25600) at 1.20V with CL22 timings; when mixed with slower DDR4 the system will clock all modules to the lowest common speed and latency, so the kit will operate at the slower sticks' specifications.
How can I verify the 2Rx4 registered ECC configuration is active after installation?
Check the BIOS memory information or run a tool such as dmidecode or CPU-Z; it should report 64GB capacity, 3200MT/s speed, registered (buffered) type, ECC enabled and dual-rank (2Rx4) organisation.
Does the KTH-PL432/64G package include a heat spreader or any extra accessories I need to buy separately?
The module ships without a heat spreader and is supplied as a single 288-pin DIMM; no cables, brackets or additional components are included or required for installation.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



